Description
The Barnes Banded Solid is a 750 grain .50 BMG projectile that trades expansion for pure, uninterrupted penetration. Instead of a jacket wrapped around a lead core, the entire bullet is machined from a homogenous copper/zinc alloy, so there's no jacket to shed and no core to break up or deform on impact. When it hits dense muscle or heavy bone, it simply tracks straight and keeps plowing forward. That solid-metal construction is what separates a true Banded Solid from the full metal jacket bullets some folks lump into the same category.
What Sets the Banded Solid Bore Rider Apart
Look closely at the shank and you'll see multiple bands, or rings, cut into the body. Those grooves relieve pressure and cut down on fouling, which keeps your bore cleaner round after round. The nose design is built to resist deflection, so the bullet stays on its line even through thick bone. It carries a G1 ballistic coefficient of 1.07 and a sectional density of 0.412, with an overall length right around 2.625 inches. The spitzer boat tail profile and secant ogive are shaped for retaining velocity downrange.
Fitting the Banded Solid to the Right Rifle
This one is specific about where it belongs. The 750 grain Banded Solid Bore Rider uses a secant ogive and is designed for single-shot rifles with custom throats, where overall cartridge length isn't a limiting factor. It is not intended for standard-throat .50 BMG rifles, so match your chamber and throat before you load. Keep in mind these are component bullets for reloaders, not loaded ammunition.
One of the handier details for anyone running a Barnes setup: the Banded Solid is weight-matched to the Barnes TSX of the same caliber. That means you can swap between the solid and the expanding bullet without chasing a new point of impact, which makes load development a lot less painful. Each box holds 20 bullets at .510 diameter, made in the USA.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30703
- UPC: 716876510757
- Caliber: .50 BMG
- Diameter: .510 in
- Bullet Weight: 750 Grain
- Bullet Style: Spitzer Boat Tail (SBT) Bore Rider
- Brand Style: Banded Solid
- Ogive: Secant
- Material: Homogenous Copper/Zinc Alloy
- Ballistic Coefficient (G1): 1.07
- Sectional Density: 0.412
- Overall Length: 2.625 in
- Quantity: 20 per Box
- Country of Origin: USA
What’s Included
- 20 Barnes Banded Solid .50 BMG 750 gr Bore Rider bullets (reloading components, not loaded ammunition)
Frequently Asked Questions
Are the Barnes Banded Solid .50 BMG bullets loaded ammunition or reloading components?
These are component bullets for handloaders, not loaded ammunition. You'll need your own brass, powder, and primers to assemble finished cartridges. Each box includes 20 of the 750 grain .510 diameter projectiles.
Will the Banded Solid Bore Rider work in a standard .50 BMG rifle?
No. The 750 grain Banded Solid Bore Rider uses a secant ogive and is designed for single-shot rifles with custom throats where overall cartridge length isn't a concern. It is not intended for standard-throat .50 BMG rifles, so confirm your throat and chamber dimensions before loading.
What makes a Banded Solid different from a standard FMJ bullet?
A lot of so-called solids are really full metal jacket bullets with a lead core. The Barnes Banded Solid is machined entirely from a copper/zinc alloy, so there's no separate jacket to shed and no lead core to break apart. That's why it tracks straight and holds together through heavy bone.
Can I switch between the Banded Solid and a Barnes TSX without re-zeroing?
Yes, that's one of the design goals. The Banded Solid is weight-matched to the Barnes TSX of the same caliber, so you can interchange the solid and the expanding bullet without a noticeable shift in point of impact. It makes running both loads off one rifle a lot simpler.



Reviews
There are no reviews yet.