$141.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Banish 30 earned its reputation as one of the most versatile cans out there, but the original direct-thread mount kept it locked out of the growing HUB ecosystem. This adapter fixes that. Thread it into your Banish 30 and you have a standard 1.375×24 HUB interface, which means direct-thread mounts in whatever pitch you need, quick-detach systems, muzzle brake inserts, and just about any other HUB-pattern accessory on the market. It comes from Silencer Central under part number 100000311167, so it is built specifically for this suppressor rather than being a one-size-fits-most solution.
HUB has become the common language for large-format rifle suppressor mounting, and once your can speaks it, swapping between hosts gets a lot simpler. Run a 5/8×24 direct-thread mount on your bolt gun, a QD setup on your semi-auto, and move one suppressor between them without buying a second can. The adapter itself measures a slim 0.12 inches and weighs well under an ounce, so it does not add meaningful length or mass to a suppressor people chose for its balance in the first place.
The kit ships with a custom installation tool to handle the conversion properly. The factory direct-thread mount is secured with Rocksett, so plan on soaking the mount end of the suppressor in warm water for about 15 minutes to soften the adhesive before removal. Once the old mount is out, apply a small amount of Rocksett to the adapter threads, snug it into place, and give it a full 24 hours to cure before shooting. It is a straightforward bench project if you take your time.
One thing worth checking before you order: Banish 30 suppressors with serial numbers beginning in B0 or B30 need the spacer-compatible version of this kit. All other Banish 30s use this standard version, so take a quick look at your serial number and you are good to go.
Almost, but check your serial number first. If it starts with B0 or B30, you need the spacer-compatible version of this kit instead. Every other Banish 30 takes this standard version, and the included tool handles the install.
The 1.375×24 HUB pattern is the industry standard for large-format rifle suppressor mounting. Once the adapter is installed, your Banish 30 can run direct-thread mounts in different pitches, quick-detach systems, and muzzle brake inserts from Silencer Central and other HUB-compatible makers. It turns one suppressor into a much easier multi-rifle setup.
It is a doable bench job. Soak the mount end in warm water for about 15 minutes to break down the factory Rocksett, remove the original direct-thread mount, then install the adapter with a dab of fresh Rocksett using the included tool. Let it cure a full 24 hours before you shoot.
Barely any. The adapter measures just 0.12 inches and the whole kit is listed at 0.70 ounces, so your Banish 30 keeps the same compact footprint and balance you bought it for.
| UPC | 810171225948 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000311167 |
| Length | 0.12" |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.