$1,099.00
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Short suppressors usually mean loud suppressors, but the Banish Speed K Ti breaks that rule. At just 4 inches long with a 2 inch diameter, this can adds barely any length to your rifle while still knocking down 20.6 decibels at the shooter's ear and 24.4 at the muzzle on a 16 inch barrel. The trick is internal volume. That wider 2 inch body gives the gas more room to expand than a skinny K can, which is why it hangs with suppressors nearly twice its size.
The original Speed K came out of a partnership between Silencer Central and Federal Premium, built tough for duty use. The Ti version takes that award-winning design and prints it entirely from titanium using DMLS 3D printing, dropping the weight from over 14 ounces down to 8.6. That's roughly 40 percent lighter, and you feel it immediately. The rifle swings faster, balances better, and doesn't get nose heavy the way it does with a full-size can hanging off the muzzle.
Anyone who has run a suppressed AR knows the downside: gas blowing back through the receiver and into your eyes. The Speed K Ti fights that with controlled flow technology and a vented fourth baffle, holding the increase in blowback to just 5.8 percent over shooting unsuppressed. Your rifle keeps cycling reliably without needing an adjustable gas block or other tuning, and you spend less time blinking through carbon haze between strings.
This is the can for predator hunters working brush, hog hunters shooting from trucks and helicopters, competition rifles where every ounce matters, and home defense setups that need to stay maneuverable indoors. It mounts via the industry standard HUB pattern and ships with a 1/2×28 direct thread mount, so it goes right on most AR barrels and plays nice with the mounting systems you may already own. Made in the USA and backed by a lifetime warranty, it took home Guns & Ammo Suppressor of the Year honors for good reason.
It measures 20.6 dB of reduction at the shooter's ear and 24.4 dB at the muzzle on a 16 inch barrel, which is impressive for a 4 inch suppressor. The 2 inch diameter gives it more internal volume than most K-length cans, so it performs closer to a full-size suppressor than its length suggests. Many owners report it sounding nearly as quiet as much longer 5.56 cans.
Yes, it uses the industry standard HUB mounting pattern, so it accepts a wide range of aftermarket HUB-compatible mounts and muzzle devices. Out of the box it comes with a 1/2×28 direct thread mount, which covers most standard AR-15 barrels in .223 and 5.56.
This is one of its strongest selling points. The controlled flow design and vented fourth baffle hold blowback to only a 5.8 percent increase over shooting unsuppressed, which is remarkably low for a short 5.56 can. Most rifles will cycle normally without an adjustable gas block or any tuning.
The internals and suppression performance are essentially the same, but the Ti version is 3D printed entirely from titanium instead of heavier alloys. That cuts the weight from about 14.1 ounces down to 8.6, roughly 40 percent lighter. It makes a real difference in how the rifle balances and handles, especially on hunting and competition builds.
| UPC | 810171221650 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000111334 |
| ATF Type | Silencer |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Length | 4 |
| Model | |
| Product Type | Suppressor |
| Shipping Weight | 1.0 |
| Thread Pattern | 1/2×28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.