$89.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Banish 9 built its name hanging off the end of 9mm handguns, but plenty of owners eventually want to move it over to a carbine or bolt gun. That is exactly what this mount is for. Thread it into the back of the can in place of the Micro Booster assembly and the suppressor screws directly onto any fixed barrel host with a 5/8×24 muzzle. A tilting pistol barrel needs a booster to cycle, but a fixed barrel does not, so a direct thread setup gives you a simpler, more rigid connection with fewer moving parts.
The 5/8×24 pitch is the one you want for hosts like 350 Legend bolt guns and a good number of .300 Blackout barrels, which makes this the go-to option for turning the Banish 9 into a legitimate hunting can. It also covers lever guns and pistol caliber carbines threaded in this pattern. If your host wears 1/2×28 threads instead, Silencer Central makes this same mount in that pitch, so match the adapter to the barrel and you are set.
This mount is machined from Inconel, the same nickel alloy used in blast baffles and jet engines, then treated with a black oxide finish. That is more material than a part this size strictly needs, and that is the point. It sits at the hottest end of the suppressor and will not care how many mags you run through it. Swapping it in and out takes a minute, so moving the can between your carry pistol and your deer rifle is a quick bench job rather than a project.
One tax stamp, multiple hosts. That is the whole pitch here. Ditch the booster when you do not need it, tighten this mount down, and your Banish 9 goes from range pistol duty to carbine and bolt gun work without buying another can.
No, and that is the whole idea. Fixed barrel firearms like carbines, lever guns, and bolt rifles do not need a Nielsen device to cycle, so this mount replaces the Micro Booster assembly entirely. You get a solid, direct thread connection with fewer parts to keep track of.
Any fixed barrel host with 5/8×24 muzzle threads chambered in a caliber the Banish 9 is rated for. Common pairings are 350 Legend bolt guns, .300 Blackout rifles with 5/8×24 barrels, and pistol caliber carbines and lever guns in that thread pattern. Do not use it on a tilting barrel pistol, since those need the booster to cycle reliably.
No, this is a micro direct thread mount sized specifically for the Banish 9 and Banish PSTL 9 TI. The rifle cans in the Banish lineup use the larger 1.375×24 HUB interface and take a different direct thread mount. Match the mount to your can before ordering.
This particular mount is 5/8×24 only, but the Micro Direct Thread Mount is also made in 1/2×28, 1/2×28 with stop, and M13.5×1 LH. Check the thread pitch stamped on your barrel or listed in your rifle's specs and pick the matching version. Plenty of Banish 9 owners keep two mounts on hand to cover different hosts.
| UPC | 810171227652 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350043 |
| Caliber/Gauge | 9mm |
| Color | Black |
| Model | |
| Package Height | 0.8 |
| Package Width | 3.0 |
| Product Type | Mount |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.