$35.99
372 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Nothing kills a range day faster than realizing your suppressor threads don't match your barrel. The Banish 5895 Thread Adapter fixes that mismatch by stepping a 1/2×28 threaded barrel up to 5/8×24, so the can or muzzle device you already own goes right on. This is a common pairing problem for folks who bought a suppressor for a .30 caliber rifle and later want to run it on an AR-15, a .22 bolt gun, or anything else wearing standard 1/2×28 threads.
Banish machines these adapters on CNC equipment and holds the tolerances tight, which matters a lot more with suppressors than with most accessories. A sloppy adapter invites misalignment, and misalignment is how baffle strikes happen. This one threads on true and gives your muzzle device a square, concentric shoulder to torque against. The body is 1040 stainless steel with a blued black finish that helps hold lubricant, and the machined wrench flats mean you can snug it down properly with a real wrench instead of guessing with pliers.
At just 0.78 inches long, the 5895 adds barely any length to your setup and disappears under most suppressor mounts. It stays put once installed, but it also comes off cleanly when you want to return the barrel to its original threads. For anyone building out a one-can, multiple-rifle setup, a quality thread adapter like this is one of the cheapest ways to stretch the value of your suppressor investment.
Banish is the house brand of Silencer Central, a company that lives and breathes suppressors, so this adapter was designed by people who understand what a can needs from its mounting surface. It is a simple part done right: correct thread pitch on both ends, honest steel construction, and machining you can trust behind a projectile moving a couple thousand feet per second. Grab one for the range bag and stop letting thread pitch decide which rifle gets suppressed.
It screws onto a barrel with 1/2×28 threads and gives you 5/8×24 male threads on the other end. That lets you mount suppressors, brakes, and other muzzle devices designed for 5/8×24 threads, which is the common pitch for .30 caliber rifles. It's a quick way to run one suppressor across multiple guns.
Yes, as long as the adapter is well made and installed correctly, and this one is CNC-machined specifically to hold tight tolerances for concentricity. Thread it on snug against the barrel shoulder using the wrench flats, then check alignment before firing. Always confirm your suppressor's bore is rated for the caliber you're shooting through it.
It will. Thread pitch is thread pitch, so any direct-thread suppressor or muzzle device with a 5/8×24 mount will spin onto this adapter regardless of who made it. It's built by Silencer Central's Banish line, but there's nothing proprietary about the interface.
The adapter measures 0.78 inches overall, and part of that gets absorbed as your muzzle device threads over it. In practice you're adding well under an inch to your setup, which most people never notice once a suppressor is hanging off the end.
| UPC | 810171220363 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000310670 |
| Color | Black |
| Length | 0.78" |
| Model | |
| Package Height | 0.001 |
| Package Width | 3.0 |
| Product Type | Thread Adapter |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.