$166.25
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 14.5-inch length is one of those in-between spots that .300 Blackout builders end up hunting for. Most barrels land at 10.5" or 16", so if you want a little more reach out of your supersonic loads while keeping the whole package tight and quick to handle, this Ballistic Advantage Modern Series barrel fills a real gap. It runs a pistol-length gas system, so it works cleanly with short builds and suppressed setups where you want the extra dwell time managed properly.
The .300 Blackout was designed to burn its powder charge in a short barrel, and this length sits in a smart middle ground. Supersonic 110 to 125 grain loads pick up meaningful velocity over a 10.5", while heavy subsonic 220 grain rounds barely notice the difference and stay comfortably below the sound barrier. That flexibility is the whole appeal of the cartridge, and this barrel is set up to take advantage of both sides of it.
This one is machined from 4150 Chrome Moly Vanadium steel and finished with QPQ (quench-polish-quench) nitride, inside and out. That treatment hardens the surface for corrosion resistance and a slick, low-friction bore rather than building up a coating like traditional chrome lining. The M4 feed ramp extension gets the same QPQ treatment, which helps feeding stay consistent round after round.
The 1:7 twist is the one you want if your diet leans toward heavy subsonics, since the faster spin keeps long 220 grain bullets stable and flying point-first. It still handles lighter supers just fine, so you get true do-it-all range from 110 up to 220 grain. The muzzle is 5/8×24 threaded for direct suppressor or muzzle device mounting, the gas block journal is a standard .750", and it uses a DRP profile at right around 27 ounces. It's a straightforward drop-in for a standard AR-15 build, and it pairs especially well with an adjustable gas block if you plan to switch between suppressed subs and unsuppressed supers.
This barrel uses a 1:7 twist, which stabilizes the full .300 Blackout range from 110 grain supersonics up to heavy 220 grain subsonics. The faster twist is especially well suited to heavy subsonic loads, keeping those long bullets flying point-first. If your build leans toward suppressed subsonic shooting, this is the twist you want.
Yes, the muzzle is 5/8×24 threaded, which is the standard pitch for .300 Blackout muzzle devices and suppressors. That lets you run a can directly to get the most out of subsonic loads, or mount a flash hider or brake for supersonic use. No adapters needed for common .30-caliber cans.
The 14.5" length is a less common middle ground that gives you noticeably more velocity on supersonic loads than a short 10.5" without the bulk of a full 16" rifle setup. Subsonic loads perform about the same across those lengths since they're loaded to stay under the sound barrier regardless. It's a solid pick if you want a compact feel with a little extra reach on your supers.
It's designed for the AR-15 platform with an M4 barrel extension and a standard .750" gas block journal, so it fits standard uppers and gas blocks. One of the perks of .300 Blackout is that it runs with a standard 5.56 bolt carrier group and standard magazines, so a barrel swap is often all you need. Pairing it with an adjustable gas block is smart if you plan to switch between suppressed and unsuppressed loads.
| UPC | 819747022042 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BABL300009M |
| Product Type | Barrel |
| Model | |
| Color | Black |
| Caliber/Gauge | .300 AAC Blackout |
| Barrel Length | 14.5" |
You must be logged in to post a review.
Reviews
There are no reviews yet.