$184.50
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Ballistic Advantage BAPSG195T3W is a Premium Series replacement barrel built for the Glock 19, and it checks a lot of boxes for anyone looking to upgrade past the factory tube. It fits Gen 3 through Gen 5 pistols, wears a 1/2×28 threaded muzzle for suppressors and comps, and shows off spiral fluting paired with an iridescent PVD finish that shifts colors depending on how the light hits it. If you want something that performs and turns heads at the range, this one delivers on both fronts.
This barrel is machined from hardened 416R stainless steel, a material prized for its strength, toughness, and resistance to corrosion. Every barrel gets honed, lapped, and tumbled at the factory, and tolerances are held to less than .0001 deviation of the bore. That translates to tighter groups than a standard factory barrel and no break-in period to fuss with. The QPQ and PVD finishes work together to boost surface hardness and shrug off wear and the elements, so the good looks hold up round after round.
The 1/2×28 threading is the common standard for 9mm, so it plays nice with most suppressors, compensators, and muzzle devices you'll come across. The spiral fluting isn't just for show either, it trims a little weight while keeping the barrel plenty strong. One nice perk over the polygonal rifling in factory Glock barrels is that conventional rifling handles cast lead bullets without the buildup concerns, so reloaders and folks who shoot cheaper lead ammo get some breathing room.
Swapping it in is a drop-in job for most Gen 3-5 Glock 19s and takes only a few minutes with basic disassembly, no gunsmith required. Keep in mind Ballistic Advantage tests these in complete factory firearms, so if you're running an aftermarket slide, double-check your fitment. For a factory-configured G19, this barrel is about as straightforward an upgrade as they come.
It's built to fit Glock 19 Gen 3, Gen 4, and Gen 5 pistols as a drop-in replacement. Installation takes just a few minutes with basic field stripping and no gunsmithing. Ballistic Advantage tests these in complete factory firearms, so if you're running an aftermarket slide, verify fitment before you order.
The 1/2×28 pitch is the standard for 9mm, which opens the door to most suppressors, compensators, and muzzle devices on the market. A standard thread protector comes included so the threads stay covered when you're not running a device. The included O-ring helps keep the thread protector snug.
Yes. Unlike the polygonal rifling in factory Glock barrels, this barrel uses conventional rifling that handles cast lead bullets without the same buildup concerns. That makes it a friendlier option for reloaders and anyone shooting budget lead ammo. Keep up with regular cleaning like you would any barrel.
No break-in is needed. Each barrel is honed, lapped, and tumbled at the factory with tolerances held to less than .0001 deviation of the bore, so it's ready to run out of the box. You should see tighter groups compared to a standard factory barrel right from the start.
| UPC | 819747026200 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BAPSG195T3W |
| Length | 8.7000 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.