Description
The B5 Systems P-Grip 23 is a Type 23 grip built around one idea: a more vertical hand position for the way people actually run an AR today. At 13 degrees, this is about as steep as mainstream grips get, and it pulls your wrist nearly straight so your hand, forearm, and trigger finger all fall into line. If you tend to drift into that awkward chicken-wing elbow with a standard A2, this angle quietly fixes it and helps you square up behind a plate carrier or when shooting standing.
What Sets the P-Grip 23 Apart
The extended tang is the sleeper feature here. It rises higher than most beavertails and fills the gap between the grip and the receiver, spreading contact across the web of your hand for a more locked-in feel and a little help managing recoil. That taller tang also gives endplate-mounted QD sling swivels some breathing room, so your sling hardware clears without fighting your knuckles. Every surface wears an aggressive texture that bites without any rubber overmolding, which keeps things light at right around 2.2 ounces. Wet hands, sweaty range days, or gloves, the traction holds up.
Fit, Build, and the MultiCam Finish
Molded from mil-spec composite polymer and made in the USA, the P-Grip 23 is a straightforward drop-in swap on any AR-15 or AR-10 lower. Installation is the usual grip screw and safety spring routine, and B5 includes the hardware to get it done. The grip body is hollow and accepts the B5 Systems grip plug (sold separately) if you want to close off the bottom or stash batteries and small tools. The MultiCam pattern gives it a distinctive look that blends in nicely with matching furniture on a duty or field build.
Worth noting on ergonomics: because the design leans into a shorter length of pull, there's no texturing on the backstrap. Folks running short-eye-relief optics like an ACOG or magnified prism tend to love how this angle pairs with their setup. It's a simple, no-frills upgrade that makes a real difference in how your rifle feels in the hand.
Key Specifications
- Manufacturer: B5 Systems
- Model: P-Grip Type 23
- Manufacturer Part Number: PGR-1135
- UPC: 814927021259
- Color: MultiCam
- Grip Angle: 13 degrees
- Material: Mil-Spec Composite Polymer
- Weight: 2.2 oz
- Length: 2.73 in
- Width: 1.26 in
- Height: 4.84 in
- Fitment: AR-15 / AR-10 Platform
- Grip Type: Pistol Grip
- Grip Plug: Accepts B5 Systems Grip Plug (sold separately)
- Country of Origin: USA
What’s Included
- B5 Systems P-Grip 23 pistol grip (MultiCam)
- Grip mounting screw
Frequently Asked Questions
What grip angle does the P-Grip 23 have?
The P-Grip 23 runs a 13-degree angle, making it one of the most vertical AR grips on the market. That steep angle pulls your wrist nearly straight and lines up your hand, forearm, and trigger finger. It's a good fit for anyone shooting squared up behind a plate carrier or who finds a standard A2 grip too far rearward.
Will the B5 Systems P-Grip 23 fit my rifle?
Yes, it's a drop-in replacement for any standard AR-15 or AR-10 lower receiver. Installation is the same process as a factory grip, just remove the old grip screw, drop your safety detent spring back in, and thread on the P-Grip 23. The mounting screw is included in the box.
Does the P-Grip 23 come with a grip plug?
No, the grip plug is sold separately. The grip body is hollow and designed to accept the B5 Systems grip plug if you want to seal off the bottom or store batteries and small tools inside. Without it, the base stays open, which is fine if you're not using the internal space.
Why is there no texture on the backstrap of the P-Grip 23?
The P-Grip 23 is built for a shorter length of pull, so the design intentionally leaves the backstrap smooth while putting aggressive texturing on the sides and front. This keeps your hand positioned forward in that vertical stance the grip is designed around. It works especially well with short-eye-relief optics like an ACOG or magnified prism.




Reviews
There are no reviews yet.