$189.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The B-GC came out of a collaboration between Geissele and Brownells, with the goal of pulling every bit of Geissele's trigger know-how into a single-stage unit built around speed. It's a drop-in design, so the whole assembly goes into your lower as one piece instead of a bag of loose small parts, and it fits semi-automatic AR-15 and M16 receivers with the standard .154 inch pin holes. It'll also run in AR-style .308 rifles that accept AR-15 triggers, which makes it a versatile pick if you've got more than one build in the safe.
This one is all about a short, relatively light single-stage pull paired with a quick reset. That combination is what makes it shine for 3-Gun and recreational target work, where getting back on target for the next shot matters just as much as the first break. You feel resistance right at the wall, work through it, and the hammer drops clean. The fast reset means less finger travel between shots, which adds up when you're moving through a stage or working steel. It's worth noting Geissele designed this trigger for rapid target engagement rather than benchrest precision or tiny groups, so it's playing to its strengths on a competition or plinking gun.
The trigger ships with two springs so you can set your pull weight. Run the black spring for roughly a 3.2 pound pull, or swap in the other spring for about 4 pounds if you want a touch more resistance under your finger. Both the trigger and hammer are steel with a black finish, so you're getting the durability Geissele is known for.
Installing a drop-in like this is approachable even for a first-timer, though having a little AR trigger experience helps. Take your time seating the pins, run a proper function check to confirm the hammer stays cocked with the safety on, and put a drop of quality lubricant on the engagement surfaces before you head to the range.
The B-GC includes two springs so you can choose your pull weight. The black spring gives you around a 3.2 pound pull, and the alternate spring bumps it up to about 4 pounds. Swapping between them is a quick job during installation, so you can tune it to your preference.
It fits standard semi-automatic AR-15 and M16 receivers with .154 inch pin holes, and it can also be installed in AR-style .308 rifles that accept AR-15 triggers. If your larger-frame build uses AR-15 spec trigger and hammer pins, you're good to go. Double-check your receiver's pin size before ordering if you're unsure.
Geissele built this one for rapid target engagement, like 3-Gun and fast recreational shooting, rather than benchrest work or shrinking your groups. The short pull and quick reset are the whole point here. If your priority is tight groups at distance, a two-stage precision trigger would be a better match.
Because it's a drop-in unit, the assembly goes into your lower as one piece, which simplifies things compared to a standard parts kit. It's approachable for most builders, though a little familiarity with AR triggers helps. Always run a function check afterward to confirm the hammer stays cocked with the safety engaged, and lube the engagement surfaces before shooting.
| UPC | 817953022269 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 05-275 |
| Style | Drop-In |
You must be logged in to post a review.
Reviews
There are no reviews yet.