Description
The Axcel Accutouch AVX-31 Long Shade Kit is a simple upgrade that makes a real difference in how clean your sight picture looks downrange. Glare inside the scope housing is one of those things you don't notice until it's washing out your dot or fiber, and this kit gives you two ways to shut it down. Both shades are made for the 31mm AVX scope and thread right onto the housing, so setup is quick and there's no guesswork.
What the Two Shades in the AVX-31 Kit Do
The kit pairs a Long Shade and a Stepped Shade so you can dial in your setup depending on lighting and how you shoot. The Long Shade installs on the target side of the scope and adds extra shade and protection for the lens and ring pin inside the housing, which helps keep light transmission consistent from shot to shot. The Stepped Shade goes on the archer's side, protecting the ring pin and lens on that end while blocking stray light from reaching your eye. You can run one, the other, or both depending on the sun angle and your shooting position.
The Built-In Torque Indicator on the Stepped Shade
The Stepped Shade carries an engraved torque indicator ring, and that's a feature target archers lean on. It acts as a reference point for lining up your scope with your peep, so you can check your alignment quickly and stay consistent every time you draw. It replaces the standard indicator ring that comes without a sunshade, so you're getting glare control and alignment help in one piece.
Fitment for the Accutouch AVX-31 Scope
This kit is built specifically for the AVX-31 (31mm) scope and is not compatible with older AV or AX scopes. Axcel lists these shades under both AccuTouch and Landslyde part numbers, but the hardware is the same since the AVX scope is identical across those sight platforms. If you're running a 31mm AVX housing and want cleaner light control, this is the shade set to grab.
Key Specifications
- Manufacturer: Axcel
- Manufacturer Part Number: ACUT-SSLS-3BK
- UPC: 611254104712
- Color: Black
- Fits Scope: AVX-31 (31mm)
- Compatibility: Accutouch AVX-31 sights and housings
- Shades Included: Long Shade and Stepped Shade
- Stepped Shade Feature: Integrated torque indicator ring
- Long Shade Mount Location: Target side of scope
- Stepped Shade Mount Location: Archer's side of scope
- Not Compatible With: AV or AX scopes
What’s Included
- Long Shade (target side)
- Stepped Shade with integrated torque indicator (archer's side)
Frequently Asked Questions
What scopes does the Accutouch AVX-31 Long Shade Kit fit?
This kit is made for the 31mm AVX-31 scope used on Axcel Accutouch and Landslyde sights. It will not fit the older AV or AX scope models. Since the AVX scope is the same across those sight platforms, the shades work on either even though Axcel lists them under different part numbers.
What is the difference between the long shade and the stepped shade?
The Long Shade installs on the target side of the scope and adds extra shade and protection for the lens and ring pin, helping keep light transmission steady. The Stepped Shade mounts on the archer's side to protect the ring pin and lens there and blocks stray light from reaching your eye. You can run one or both depending on the sun and your setup.
Does the stepped shade replace the torque indicator ring?
Yes. The Stepped Shade has an engraved torque indicator built right in, so it takes the place of the standard indicator ring that comes without a sunshade. That gives you glare control and a reference point for aligning your scope to your peep in one piece.
Do I need both shades or can I use just one?
You can run whichever setup works best for your conditions. Many archers use both for maximum glare control, but you can install just the long shade or just the stepped shade if that suits your lighting and shooting position. Having both in the kit gives you the flexibility to adjust as the sun angle changes.



Reviews
There are no reviews yet.