0
0

Athlon Midas HMR Gen2 2-12×42 APLR-H2 SFP IR MOA Scope

UPC: 813869026100

$579.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Athlon Midas HMR Gen2 2-12×42 lands in that sweet spot a lot of folks are after: enough magnification to reach out when the shot calls for it, but compact and light enough that it won't turn your hunting rifle into a boat anchor. At 19 ounces and 12 inches long, it mounts up clean, and the 42mm objective sits low over the bore without any wrestling with tall rings. It's a second focal plane design, so the reticle stays the same size no matter where you set the power ring, which is exactly what a lot of hunters prefer when they're going from a snap shot in the trees to a settled shot across an open field.

What the Midas HMR Gen2 Brings to the Field

The glass is where this scope earns its keep. Fully multi-coated lenses paired with Athlon's XPL protective coating give you a bright, true-color image with sharp contrast, and that pays off most at dawn and dusk when game likes to move. The tube is built from one piece of aircraft-grade aluminum, then argon purged and sealed so it shrugs off fog, water, and recoil. Side parallax dials down to 10 yards, which is handy if you're shooting rimfire or air rifle setups too, not just centerfire.

Dialing and Holdovers with the APLR-H2 MOA Reticle

The illuminated APLR-H2 reticle gives you a clean MOA-based grid for holdover and windage, and the center dot lights up for that near red-dot feel in low light. Illumination runs off a common CR2032 battery with multiple brightness settings, cycled through a push button. Turrets click in crisp 0.25 MOA increments with 25 MOA per revolution, and the precision zero stop lets you dial up and drop right back to your zero without counting rotations.

Where the Midas HMR Gen2 2-12×42 Fits

Think of this as a do-it-all hunting and range optic. It handles close, fast work at 2x, then stretches out to 12x for deliberate shots several hundred yards out. A magnification throw lever comes threaded in for quick power changes, and it backs out if you'd rather run without it. For a compact scope that does not skimp on the features that matter, the Midas HMR Gen2 is an easy one to put on the shortlist.

Key Specifications

  • Manufacturer: Athlon Optics
  • Manufacturer Part Number: 213056
  • UPC: 813869026100
  • Magnification: 2-12x
  • Objective Diameter: 42mm
  • Tube Diameter: 30mm
  • Reticle: APLR-H2 SFP IR MOA
  • Focal Plane: Second Focal Plane (SFP)
  • Click Value: 0.25 MOA
  • Adjustment Per Revolution: 25 MOA
  • Total Windage & Elevation Travel: 120 MOA
  • Field of View @ 100 yds: 55.7 – 9.6 ft
  • Parallax: 10 yds to infinity
  • Eye Relief: 3.62 in
  • Length: 12 in
  • Weight: 19 oz

What’s Included

  • Athlon Midas HMR Gen2 2-12×42 riflescope
  • Magnification throw lever
  • Lens covers
  • CR2032 battery for reticle illumination
  • Lens cloth
  • Owner's manual

Frequently Asked Questions

Is the Athlon Midas HMR Gen2 a first or second focal plane scope?

It's a second focal plane (SFP) design, meaning the APLR-H2 reticle stays the same visual size no matter what magnification you're on. A lot of hunters prefer SFP because the reticle stays clean and easy to see at low power for quick shots. Just keep in mind the reticle subtensions are true at the top magnification setting.

What battery does the illuminated reticle use and how does it work?

The illumination runs on a single CR2032 lithium battery, which is easy to find just about anywhere. You turn it on with a push button and cycle through the brightness settings by pressing it again. The lit center dot gives you a red-dot-style aiming point that really helps in low light at dawn and dusk.

Does the Midas HMR Gen2 have a zero stop?

Yes, it comes with Athlon's Precision Zero Stop. Once you set your zero, you can dial up for holdover and spin right back down to a firm stop at your zero without counting clicks or revolutions. It's a nice feature for hunters who need to get back to a known point in a hurry.

What size rings does the Athlon Midas HMR Gen2 need?

It's built on a 30mm main tube, so you'll want a set of 30mm rings. With the 42mm objective you can usually run low or medium rings and keep the scope mounted close to the bore. Just double check clearance for your specific rifle and barrel contour before you torque everything down.

Additional information

UPC

813869026100

Manufacturer

Manufacturer Part Number

213056

Eye Relief

3.62''

Objective Size

42mm

Reticle

APLR-H2 SFP IR MOA

Reviews

There are no reviews yet.

Be the first to review “Athlon Midas HMR Gen2 2-12×42 APLR-H2 SFP IR MOA Scope”