$80.99
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Charging handles are one of those parts nobody thinks about until they're fighting a sticky mil-spec latch with cold fingers or gassy loads. The Armaspec Victory fixes that on the AR10 side of things with a genuinely ambidextrous design, oversized latches, and a gas-venting layout that pushes captured propellant down and away instead of straight back at you. It's a clean upgrade for anyone building out a .308 or AR10 pattern rifle who wants something that feels deliberate every time they run the bolt.
Both latches run off the same center-force mechanism, which means you can charge from either side and the pull stays balanced instead of torquing the shaft to one side. The right latch is extended a bit longer so you clear the forward assist without fumbling, and the curved handles have finger grooves machined in for a positive grip whether you're bare-handed or wearing gloves. Those integrated gas vents are the real standout here, routing hot gas downward and keeping carbon out of your line of sight on suppressed or high-pressure setups.
This one is machined from 7075-T6 aluminum and finished with a hard coat Type III anodize, so it holds up to repeated hard use without wearing through. It's light at right around 1.4 ounces, uses high-strength coiled roll pins to hold the latches, and it's made in the U.S.A. with a lifetime warranty behind it. That combination makes it a set-it-and-forget-it part rather than something you're babying.
The Victory is built for DPMS Gen 1 and Armalite AR10 pattern uppers, and it drops right into popular options like the Aero Precision M5. Keep in mind AR10 platforms are not standardized the way AR15s are, so it will not fit Gen 2 style or proprietary uppers such as the SIG716, S&W M&P10, or HK MR762. If you're unsure what pattern your upper is, it's worth confirming before you order.
It's built for DPMS Gen 1 and Armalite AR10 pattern uppers and drops right into popular receivers like the Aero Precision M5. It will not work with Gen 2 style or proprietary uppers such as the SIG716, Savage MSR10, S&W M&P10, or HK MR762. Since AR10 platforms aren't standardized like AR15s, confirm your upper pattern before ordering.
The vents are machined to route captured propellant gas downward and away from your face rather than letting it blow straight back. That's a real benefit on suppressed builds or with hotter loads where blowback gets noticeable. It also helps keep carbon out of your sight picture during fast strings.
Yes. Both latches operate off the same center-force mechanism, so you can charge from either side with a balanced pull that won't twist the shaft. The right latch is extended slightly to clear the forward assist, making it comfortable for left and right-handed use.
It's machined from 7075-T6 aluminum and finished with a Type III hard coat anodize for durability. The latches are held by high-strength coiled roll pins, and the whole unit weighs about 1.38 ounces. It's made in the U.S.A. and backed by Armaspec's lifetime warranty.
| UPC | 810048492183 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARM162-FDE |
| Color | CHARGING HANDLE |
| Length | 11 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.