Description
The Armaspec Stealth Recoil Spring (SRS) H3 Gen 4 replaces your factory buffer and spring with a single sealed unit that does the same job in a much cleaner way. Instead of a bare spring bouncing off the inside of your buffer tube every time the bolt cycles, the SRS runs the spring over an internal guide rod so it never touches the tube wall. That one change is where the smoother feel and quieter action come from, and it's why so many folks reach for one when they're chasing a more refined shooting experience.
What the Stealth Recoil Spring Actually Does
This is a multi-stage design, which is the part that separates it from a plain heavier buffer. The first stage keeps the buffer mass under constant tension against the bolt carrier group, and a secondary stage kicks in during cycling to soak up more of the felt recoil. The result is a rifle that runs smoother and loses that classic spring "twang" you hear on a standard setup. The H3 model carries an equivalent weight of 5.6 oz, with the complete system tipping the scale around 8.0 oz, making it a solid match for shorter-barreled and pinned or gas-heavy builds that need a little more mass to settle down.
Fitting the SRS H3 Gen 4 to Your Build
Installation is genuinely a drop-in job. It's built for AR-15 rifles running a carbine-length buffer tube, and it slides right in where your old buffer and spring came out, usually in about five minutes. Worth knowing before you order: the SRS needs a bolt carrier with a rear opening of at least .60 inches, and a handful of carriers on the market run smaller than that and won't work with it. If you're on an A5 or rifle-length tube, you'll need a spacer to make it fit.
Gen 4 Refinements
The Gen 4 update cleans up a few things from earlier versions. Armaspec dropped the o-ring from the weight, swapped to a machined cap on the rod, and reworked the end hardware to trim out potential failure points. It's made in the U.S.A. and finished in black. For anyone tuning a 5.56, .223 Wylde, or .300 Blackout carbine and wanting quieter, smoother cycling without cutting into the receiver, this is a straightforward upgrade.
Key Specifications
- Manufacturer: Armaspec
- Model: Stealth Recoil Spring (SRS) H3 Gen 4
- Manufacturer Part Number: ARM253-H3
- UPC: 810048492787
- Buffer Weight (Equivalent): 5.6 oz
- Complete System Weight: Approx. 8.0 oz
- Platform: AR-15
- Tube Compatibility: Carbine-length buffer tube
- Design: Self-contained multi-stage captured spring
- Bolt Carrier Requirement: Rear opening of at least .60 inches
- Length: 10.95 in
- Color: Black
- Country of Origin: Made in U.S.A.
- Product Type: Buffer System
What’s Included
- Armaspec Stealth Recoil Spring H3 Gen 4 (self-contained buffer and spring assembly)
Frequently Asked Questions
Will the Stealth Recoil Spring H3 fit my AR-15?
It's designed for AR-15 rifles with a carbine-length buffer tube and drops right in where your factory buffer and spring came out. If you're running an A5 or rifle-length tube, you'll need a spacer to make it work. Double-check that your bolt carrier has a rear opening of at least .60 inches, since a few carriers on the market run smaller and won't clear the unit.
How does the H3 differ from the lighter C, H, and H2 versions?
The H3 carries an equivalent weight of 5.6 oz, making it the heaviest of the standard SRS lineup. That extra mass helps settle down short-barreled builds, pinned setups, and gas-heavy guns that tend to cycle hard. Lighter builds or standard 16-inch carbines often do better with the C, H, or H2 weights.
What makes the Gen 4 different from earlier versions?
The Gen 4 removes the o-ring that used to sit on the weight, moves to a machined cap on the guide rod, and reworks the end hardware to cut out potential failure points. These are reliability-focused refinements over the older generations. The core multi-stage, captured-spring design stays the same.
Does the Stealth Recoil Spring really make the action quieter?
It gets rid of the classic metallic spring twang you hear on a standard buffer setup because the spring rides on an internal guide rod instead of scraping the tube wall. It won't make your rifle silent, but the action does run noticeably smoother and calmer. Most people notice the difference the first time they cycle it.






Reviews
There are no reviews yet.