$80.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Armaspec Fireball is one of those muzzle devices that gets noticed the second you pull it out of the box. It has an aggressive, almost jet-engine look with three angled ports cut into the body, and that design isn't just for show. Those ports work together to redirect propellant gas up and to the sides, which pulls the muzzle down and keeps it from climbing during rapid strings of fire. If you run drills, compete, or just like fast follow-up shots without chasing your sight picture back onto target, this is the kind of upgrade that makes a real difference shot to shot.
This brake is machined from 416 stainless steel and finished in black nitride, sometimes called QPQ, which gives it a hard, corrosion-resistant surface that holds up to heat cycling and weather. It's sized for .223 Remington and 5.56 NATO barrels with a standard 1/2×28 thread pitch, so it drops right onto the vast majority of AR-15 uppers without needing an adapter or gunsmith work. The compact 2.31 inch length keeps your overall barrel length close to stock, which matters if you're trying to keep a build balanced and maneuverable.
Installation is straightforward with basic tools. You'll want a crush washer (not included with this brake) oriented with the tapered side facing the barrel shoulder, then thread the brake on by hand until snug. From there, a 3/4 inch open-end wrench or armorer's wrench gets you the rest of the way, tightening in small increments until the ports line up at 12 o'clock. Going slow here matters more than muscle, since overtightening past that mark is the most common mistake people make with any timed muzzle device.
Beyond the recoil control, this brake gives a build some real character. The triple-port cut and black nitride finish look sharp on both tactical setups and range guns, and Armaspec backs the design with a patent on the port geometry, meaning you won't find this exact profile on a dozen other brands. It's made in the USA and weighs in at a light 3.17 ounces, so you're not adding noticeable weight to the front end while gaining a noticeable upgrade in shot-to-shot control.
No, this muzzle brake does not include a crush washer, so you'll want to grab one separately before installing it. Use a standard 1/2×28 crush washer with the tapered side facing the barrel shoulder for proper timing and a tight seal.
This version is threaded 1/2×28 for .223/5.56 barrels, which covers the vast majority of AR-15 uppers without any modification. Armaspec also makes a 5/8-24 version of the Fireball for .308/300 Blackout AR-10 builds if you're working with a larger caliber.
The triple-port design redirects gas outward and upward, which noticeably flattens muzzle rise and softens felt recoil compared to a plain A2 flash hider. Most people notice faster sight recovery during rapid strings, though brakes do tend to push more blast and noise to the sides compared to a suppressor or hider.
Yes, the black nitride (QPQ) finish is applied specifically to resist corrosion and handle repeated heat cycling from firing. It holds up well under normal range and field use without flaking or discoloring like some cheaper coatings can over time.
| UPC | 810048490011 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARM191-BLK |
| Length | 6.3000 |
| Model | |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.