$17.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Armaspec B1 Extended Mag Release takes one of the smallest parts on your AR and makes it a whole lot easier to work. It replaces your factory mag button with a longer, wider paddle machined from aircraft-grade aluminum, giving you more surface area to press when you need to dump a magazine in a hurry. The whole point is speed and consistency: you reach the release without shifting your firing hand, which keeps you on target for that follow-up shot.
The face of the paddle is serrated, so your fingertip catches it cleanly even if you're wearing gloves or your hands are cold and wet. That extra texture means fewer missed presses and less fumbling during a reload. It weighs in at a hair under two-tenths of an ounce, so you get the ergonomic bump without adding any real weight to the rifle.
At just under half an inch of extra reach, this is one of those upgrades that punches above its size. It plays nice with Battle Arms BAD levers and similar ambi devices, and the OD Green anodized finish looks sharp against a black or FDE lower if you like a little contrast on your build. Guys running smaller hands or thick gloves tend to notice the difference right away.
This is a true drop-in part with no gunsmithing required. You pull your factory button and swap in the B1 paddle and button using the included hardware and hex key, then set the depth so it clears any anti-rotation pins on your lower. Builders consistently call it quick and painless to fit. It's compatible with most AR-15 and LR-308 receivers chambered in 5.56/.223 and 7.62/.308, and it's made in the U.S.A. with a lifetime warranty behind it.
Yes. The B1 is built to work with most AR-15 and LR-308/AR-10 receivers and fits both 5.56/.223 and 7.62/.308 platforms. As with any drop-in part, it's worth confirming your specific lower doesn't have an oddball button pocket before you install.
Not at all. It's a true drop-in swap that uses the included hardware and hex key, so no gunsmithing is needed. You just remove your factory button, install the paddle and button, and set the depth so it clears any anti-rotation pins in your lower.
It does. The B1 is designed to be compatible with the Battle Arms BAD lever and similar ambidextrous mag release devices. If you run an ambi setup, this paddle pairs with it without issue.
The larger, serrated surface gives you more to press and better grip, so you can release the mag without shifting your firing hand. That's a real advantage if you have smaller hands, run gloves, or just want faster, more consistent reloads.
| UPC | 810048490622 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARM106-ODG |
You must be logged in to post a review.
Reviews
There are no reviews yet.