0
0

Arisaka Defense Vertical Grip – Picatinny, Black Aluminum VFG

UPC: 850067813293

$40.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Arisaka Defense Vertical Grip lands in that sweet spot between a hand stop and a full-size foregrip. It gives you a real vertical purchase to drive the gun and index your support hand, but it stays short and streamlined so it isn't snagging on slings, gear, or the edge of a truck door. If you like the control of a VFG without the bulk, this is the one to look at.

What Sets the Arisaka Vertical Grip Apart

Most vertical grips clamp on with visible screws hanging off the sides. This one hides all of that. It uses a captive recoil lug that extends from inside the grip to lock into the Picatinny slots, which means no external clamp hardware and a clean, streamlined look on the rail. The lug and its mating screw are captured, so nothing falls out when you pull the grip off the gun. That radiused top profile tapers right into the mounting surface for a low-profile feel that just sits naturally under your hand.

Built From Solid Billet

Arisaka machines the Vertical Grip from 6061 aluminum and finishes it with a MIL-A-8625 Type III hard coat anodize, the same tough, corrosion-resistant coating you'll find on serious duty parts. Owners consistently call out the machining and finish as top notch, and the hollow, no-end-cap design keeps the weight down to right around 1.8 ounces. It feels sturdy in the hand without adding noticeable heft to the front of the rifle.

Installing the Arisaka VFG on Your Picatinny Rail

Mounting is straightforward. You center the grip on the Picatinny slots and extend the recoil lug with a 7/64" Allen wrench, turning counterclockwise to snug it down and clockwise to retract it. It takes five to six full turns for the lug to bottom out, and Arisaka recommends torquing to no more than 15 inch-pounds. Worth practicing the extend and retract a couple times before install so you get a feel for it. Made in the USA.

Key Specifications

  • Manufacturer: Arisaka Defense
  • Manufacturer Part Number: VFG-P
  • UPC: 850067813293
  • Product Type: Vertical Foregrip
  • Mounting Interface: Picatinny (1913)
  • Material: 6061 Aluminum
  • Finish: MIL-A-8625 Type III Hard Coat Anodized
  • Color: Black
  • Weight: Approx. 1.8 oz
  • Attachment: Captive internal recoil lug, no external clamp hardware
  • Install Tool: 7/64" Allen wrench (not included)
  • Recommended Torque: No more than 15 in-lbs
  • Origin: Made in the USA

What’s Included

  • Arisaka Defense Vertical Grip (Picatinny, Black)
  • Captive recoil lug and mating screw (pre-installed)

Frequently Asked Questions

How does the Arisaka Vertical Grip attach to a Picatinny rail?

It uses a captive recoil lug that extends from inside the grip to lock into the Picatinny slots, so there's no external clamp hardware showing. You turn a 7/64" Allen wrench counterclockwise to extend the lug and clamp it down. Because the lug and screw are captured, nothing falls out when you remove the grip from the rail.

Is this grip closer to a hand stop or a full vertical grip?

It sits right in the middle. The Arisaka Vertical Grip is a stubby VFG that's shorter than something like a BCM vertical grip, giving you enough to drive the rifle and index your hand without the bulk of a full-length grip. A lot of folks run it as a hybrid, using it for leverage and as a forward hand stop.

What tool do I need to install it and how tight should it be?

You'll need a 7/64" Allen wrench, which is not included. It takes about five to six full turns to bottom the recoil lug out, and Arisaka recommends torquing to no more than 15 inch-pounds. Practicing the extend and retract before mounting helps you get familiar with how it locks up.

What is the Arisaka Vertical Grip made of?

It's CNC machined from 6061 aluminum and finished with a MIL-A-8625 Type III hard coat anodize for corrosion resistance and durability. The grip is hollow with no end-cap, which keeps it light at roughly 1.8 ounces while staying rock solid. It's made in the USA.

Additional information

UPC

850067813293

Manufacturer

Manufacturer Part Number

VFG-P

Product Type

Vertical Foregrip

Color

Black

Reviews

There are no reviews yet.

Be the first to review “Arisaka Defense Vertical Grip – Picatinny, Black Aluminum VFG”