Description
The Arisaka Side Scout Mount (SSM) swaps out the bulky factory Picatinny adapter on your Scout-style light for a slim, direct M-LOK attachment. Instead of stacking a light on top of a rail section, it drops the light body right down against the handguard so everything runs lower and cleaner. This is the mount people reach for when they're trying to tuck a white light in underneath a laser or illuminator and keep the whole build tight and snag-free.
Why the Side Scout Mount Earns Its Rail Space
The big draw here is clearance. The low-profile design lets the light sit beneath either side of ATPIAL-series lasers, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ, and it also clears the QD lever on Steiner DBAL I2, A3, and D2 units. On top of that, the SSM only takes up a single M-LOK slot, so you've got plenty of freedom to slide it forward or back and dial in exactly where your light lives. It's fully ambidextrous too, so left or right side and high or low orientation are all on the table.
Light Compatibility for the Arisaka SSM
This mount plays nice with a long list of Scout-lug lights. That covers SureFire M300 and M600 series lights, Modlite PLH, PLHv2, and OKW, Streamlight ProTac Rail Mount 1, 2, and HL-X (non-laser), the Olight Odin, CD REIN, and Arisaka's own 300, 600, and 18650 Series bodies. Longer-base Scout lights like the M620 and M951/2 will work with the addition of Arisaka's Offset M620 adapter. As a bonus, it also fits nicely on Sig MPX PCC and MCX Virtus M-LOK handguards.
Build and Setup Notes
Arisaka machines the SSM from 6061-T651 aluminum with a MIL-A-8625 Type III hard coat anodized finish, and the whole thing weighs in around 0.6 ounces. It ships with the hardware you need to bolt a light body to the mount. You'll want a T20 Torx or IP20 TorxPlus driver to install it, plus a T9 Torx to pull the stock Picatinny adapter off a SureFire Scout Light. A dab of medium-strength threadlocker on the screws keeps everything put over a long life of recoil.
Key Specifications
- Manufacturer: Arisaka Defense
- Model: Side Scout Mount (SSM)
- Manufacturer Part Number: SSM-M
- UPC: 601557939470
- Mounting Interface: M-LOK
- Light Platform: Scout-style lug pattern
- Material: 6061-T651 aluminum
- Finish: MIL-A-8625 Type III hard coat anodized, Black
- Weight: Approx. 0.6 oz
- M-LOK Slots Required: One
- Orientation: Ambidextrous, high or low
- Install Tool: T20 Torx / IP20 TorxPlus (not included)
- Country of Origin: Made in USA
- Product Type: Weapon Light Mount
What’s Included
- Arisaka Side Scout Mount M-LOK body
- Two M-LOK nuts
- Two 10-24 x 5/16" Torx button head screws
- Two 8-32 x 5/16" Torx flat head screws
Frequently Asked Questions
What lights fit the Arisaka Side Scout Mount M-LOK?
It works with Scout-lug lights, including SureFire M300 and M600 series, Modlite PLH, PLHv2, and OKW, Streamlight ProTac Rail Mount 1, 2, and HL-X (non-laser), the Olight Odin, CD REIN, and Arisaka 300, 600, and 18650 Series bodies. Longer-base lights like the M620 and M951/2 will run with the addition of Arisaka's Offset M620 adapter. The mount replaces the factory Picatinny adapter that comes on those lights.
How much rail space does the Side Scout Mount take up?
In its standard setup, the SSM only occupies a single M-LOK slot. That leaves you a lot of room to position the light exactly where you want it fore and aft. It's also ambidextrous, so you can run it on either side of the handguard and orient the light high or low.
Will the SSM clear my laser or illuminator?
Yes, that's the whole point of the design. The low-profile mount tucks the light beneath either side of ATPIAL-series units like the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It also clears the QD lever found on Steiner DBAL I2, A3, and D2 lasers.
What tools do I need to install the Arisaka Side Scout Mount?
You'll need a T20 Torx or IP20 TorxPlus driver to attach the mount and light body. To remove the stock Picatinny adapter from a SureFire Scout Light, you'll also want a T9 Torx driver. Arisaka recommends a low to medium strength threadlocker such as Loctite 222 or 243 on the screws.




Reviews
There are no reviews yet.