Arisaka Offset Scout Mount for LWRC Threaded Handguards

Description

LWRC direct-thread handguards are great, but the stock Picatinny rail adapter puts your light out where it catches on everything. This Arisaka mount solves that. It swaps out that factory adapter and locks your scout light in at a 45-degree offset, tucking it right up against the rail so the profile stays slim and comfortable in the hand.

What the Arisaka Offset Scout Mount Brings to Your LWRC

The whole point here is real estate. Oriented up, the light sits around the 1:30 or 10:30 clock position, and flipped the other way it drops to roughly 4:30 or 6:30. On top of that, you get three lateral mounting positions for the light body, so you can slide it closer to or farther from the top rail, your front sight, or whatever else is competing for space. If you run the Arisaka 300 or 600 Series light bodies, you can free up even more clearance for taller front sights.

Compatibility and Build of the Offset Scout Mount

This one covers a lot of ground on the light side. It fits the Surefire Scout M300 and M600 series, the Modlite PLH and OKW, Streamlight ProTac Rail Mount 1, 2 and HL-X (non-laser), the Olight Odin, and Arisaka's own 300, 600 and 18650 Series bodies. The mount is CNC machined from 6061-T651 aluminum and finished in Type III hard coat anodize, so it holds up to abuse and shrugs off corrosion. At under 0.20 inches thick, it stays out of the way while keeping the light rock solid.

Getting the Offset Scout Mount Installed

Installation is straightforward with the right bits. You'll want a T20 Torx or IP20 TorxPlus driver for the mounting screws and a T9 for the light body hardware. The included screws use a tapered design that resists backing out under recoil, though a dab of medium-strength thread locker on your fasteners is always smart. Snug it down and you've got a light that stays put shot after shot.