Description
EOTECH's EXPS sits a little low for how most people build modern carbines. The factory mount puts the optic centerline at 1.725", which leaves you stacking a riser just to reach a usable height. The Arisaka EXPS Mk2 Mount solves that in one part by completely replacing the OEM mount and setting the optic at a true 1.93" centerline, so there's no riser in the stack and no extra clamping interface to worry about.
This version fits all reticle variants of the EXPS3 and EXPS2, including the EXPS3-0, EXPS3-1, EXPS3-2, and EXPS3-DCR. It does not fit the EXPS3 HD, XPS3, XPS2, 518, 558, 552, or 512, so double-check the model number stamped on your sight before ordering. Worth noting up front that the EOTECH sight itself is not included.
What the 1.93" Arisaka Mk2 Height Gets You
The 1.93" centerline is the lower of Arisaka's two EXPS Mk2 options and it lines up with their 1.93" magnifier, keeping your holographic window and magnifier in the same plane. That taller-than-factory height supports a more upright, heads-up shooting position that pairs well with modern carbine setups. If you've already committed to a 1.93" ecosystem, this keeps everything consistent.
Build and Hardware on the Arisaka EXPS Mk2 Mount
Each mount is CNC machined from 7075-T651 aluminum and finished with MIL-A-8625 Type III hard coat anodizing, with FDE Cerakote laid on top for the Flat Dark Earth look. The quick-detach function carries over from the factory mount thanks to an included ADM QD lever, so you can pull the optic off the rail by hand and get repeatable return to zero. At 2.6 ounces, it runs about 0.6 ounces over the OEM mount while shedding the weight and bulk of a separate riser. Arisaka suggests reusing your original EXPS screws when they're in good shape and includes spares. Recommended torque is 25 inch-pounds optic-to-mount and 12 inch-pounds on the shroud. Made in the USA.
Key Specifications
- Manufacturer: Arisaka Defense
- Model: Mk2 Mount
- Manufacturer Part Number: OM2-EXPS-193-FDE
- UPC: 850067813583
- Optic Height: 1.93" centerline
- Compatible Sights: EOTECH EXPS2 and EXPS3, all reticle variants
- Not Compatible: EXPS3 HD, XPS3, XPS2, 518, 558, 552, 512
- Material: CNC machined 7075-T651 aluminum
- Finish: Type III hard coat anodizing with FDE Cerakote
- Color: Flat Dark Earth
- Mounting: ADM quick-detach lever
- Weight: 2.6 oz
- Optic-to-Mount Torque: 25 inch-pounds
- Shroud Torque: 12 inch-pounds
- Country of Origin: USA
What’s Included
- Arisaka EXPS Mk2 Mount (1.93" FDE)
- ADM QD lever
- Two 10-32 x 5/16" undercut screws
- Two 6-32 x 5/16" Torx flat head screws
- Installation and ADM QD lever instructions
Frequently Asked Questions
Will the Arisaka EXPS Mk2 Mount fit my EOTECH sight?
It's built for the EXPS3 and EXPS2 in all reticle variants, including the EXPS3-0, EXPS3-1, EXPS3-2, and EXPS3-DCR. It will not fit the EXPS3 HD, XPS3, XPS2, 518, 558, 552, or 512. Check the model number printed on your sight before ordering to be sure.
Does this replace the factory mount or stack on top of it?
It's a full replacement for the factory EXPS mount, not a riser. You remove the OEM base from the optic body, bolt the Arisaka body to the sight, and clamp it to your Picatinny rail with the mount's own ADM lever. That keeps the stack shorter and lighter than running a riser under the factory mount.
Is the EOTECH sight included with this mount?
No, the EOTECH holographic sight is sold separately. This listing is for the Arisaka EXPS Mk2 Mount in the 1.93" Flat Dark Earth configuration only. You'll transfer your existing EXPS2 or EXPS3 onto it.
Why choose the 1.93" height over the 2.26" version?
The 1.93" centerline matches up with Arisaka's 1.93" magnifier and keeps your holographic window in that same plane. It's a great fit if your other optics and risers are already built around 1.93". The 2.26" version is the one that pairs with the Unity FAST FTC and 2.26" magnifier family instead.



Reviews
There are no reviews yet.