$500.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 Zero M-Series Sizing Die in 6 GT is a full-length die engineered to take the guesswork out of sizing match brass. It ships with its own Zero M-Series shellholder and is designed to work as part of the Area 419 reloading ecosystem, where the press, the die, the brass and the rifle are all meant to play nicely together. The whole design came out of years of testing and refinement from the folks who build the ZERO press, so it reflects real reloading-bench frustrations and the fixes for them.
The headline feature is the micrometer-adjustable headspace and shoulder bump. Instead of fiddling with lock rings and shims, you dial in your bump setting and it stays put, so getting back to a known number between sessions is simple. The die includes a precision-ground expander mandrel set for roughly .002 neck tension, with additional increments available through the Area 419 Mandrel Kit if you want to tune tension to your load. The mandrel carries a long bearing surface, so it works the full neck in one pass whether you're running a shorter or longer neck in the family.
This die is reamer cut to exacting internal dimensions for a true size, which is a big reason reloaders see consistent chamber fit and no sticky bolt after a couple of firings. It handles full-length neck-to-extractor sizing, uses spring ejection for spent primers, runs replaceable steel decap pins, and includes hydraulic shoulder pressure relief. It's 100% made in America and built to be approachable for newer reloaders while still delivering what serious precision shooters are after.
Keep in mind this is a 1-1/4 inch die. It needs a Hybrid or 1-1/4 inch turret on your ZERO or compatible press and will not run on a 7/8 inch turret. It also requires the larger-diameter Zero M-Series shellholder, which is included here, so it won't work with standard shellholders or older headspace-adjustable kits.
This is a 1-1/4 inch die, so it needs a Hybrid or 1-1/4 inch turret on your ZERO or another compatible press. It cannot be used with a 7/8 inch turret or a standard 7/8 inch press. If your press is set up for standard dies, you'll need the larger turret before this one will thread in.
Yes. This version ships with the Zero M-Series shellholder, which is a larger-diameter design the die requires. Standard shellholders and older headspace-adjustable shellholder kits will not work with the M-Series die, so having the correct one in the box saves you a separate purchase.
The die includes a precision-ground expander mandrel set up for about .002 neck tension right out of the box. If you want to fine-tune tension for your load, Area 419 sells a Mandrel Kit with additional increments. The mandrel has a long bearing surface so it sizes the full neck in a single pass.
The die is reamer cut to exacting internal dimensions rather than bored, which gives a true, on-spec size and helps eliminate the sticky bolt some reloaders see after a couple of firings. It handles full-length neck-to-extractor sizing with micrometer-adjustable shoulder bump, so you get consistent headspace and repeatable results session to session.
| UPC | 810080181670 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-ZeroDie-M6GTSH |
| Shipping Weight | 3.31 |
You must be logged in to post a review.
Reviews
There are no reviews yet.