0
0

Area 419 Zero M-Series 6 Creedmoor Sizing Die 1-1/4″ w/ Shell Holder

UPC: 810080181588

$500.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built the Zero M-Series Sizing Die for 6 Creedmoor to take the guesswork out of resizing brass. Rather than fussing with shim stacks or swapping dies to dial in headspace, you get a micrometer at the top of the die that lets you set your shoulder bump precisely and come back to the same number every time. It's a full-length design that sizes the case neck all the way down to the extractor groove, so you get clean, consistent feeding and no sticky bolt after a few firings. This is a 1-1/4" die and it requires a Hybrid or 1-1/4" Turret on your ZERO or another compatible press. It will not run on a 7/8" press.

What Sets the Zero M-Series 6 Creedmoor Die Apart

The magic here is in how the whole system works together. The die is reamer cut to exacting dimensions for a true factory-spec size, which is what keeps your brass extracting cleanly instead of fighting a tight chamber on the second or third reload. Neck tension is handled by a precision ground expander mandrel that supports the inside of the neck through a long bearing surface, so the entire neck gets sized square in one pass regardless of small differences in neck length. Every die ships with a .002 neck tension mandrel, and you can fine-tune to other increments with the Area 419 Mandrel Kit.

Features That Make the 6 Creedmoor Sizing Die Worth It

Spring ejection clears spent primers, the steel decap pins are replaceable when they wear, and a hydraulic shoulder pressure relief helps prevent case deformation for more consistent results. One detail that keeps owners happy over the long haul: you can reuse the outer sleeve and buy an inner sleeve to change calibers down the road, so your first die purchase isn't a dead end.

Folks running the ZERO press routinely report near-zero runout and shoulder bump that repeats shot after shot. If you're serious about match-grade 6 Creedmoor ammo and you're already in the ZERO ecosystem, this die earns its place on the bench. Everything is 100% made in America.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-ZeroDie-M6SH
  • UPC: 810080181588
  • Cartridge: 6mm Creedmoor
  • Die Type: Full-Length Sizing Die
  • Die Diameter: 1-1/4"
  • Material: Steel
  • Headspace Adjustment: Micrometer Adjustable Shoulder Bump
  • Neck Tension Mandrel: .002 included
  • Press Compatibility: ZERO Hybrid or 1-1/4" Turret
  • Shell Holder: Includes Zero M-Series Shell Holder
  • Country of Origin: Made in USA
  • Shipping Weight: 3.29 lbs

What’s Included

  • Zero M-Series 6 Creedmoor Sizing Die
  • Zero M-Series Shell Holder
  • Area 419 ZERO Die Ring
  • .002 neck tension expander mandrel
  • Spare decapping pin
  • Install and removal tools

Frequently Asked Questions

What press do I need to run the Zero M-Series 6 Creedmoor die?

This is a 1-1/4" die, so it requires a Hybrid or 1-1/4" Turret on your ZERO press or another compatible press. It will not work with a 7/8" turret or standard 7/8" press. It also needs a Zero M-Series shell holder, which is included with this die.

Does the 6 Creedmoor sizing die come with a shell holder?

Yes. This SKU ships with the Zero M-Series shell holder, which is required to use the die. These dies are not compatible with standard shell holders because they need a larger diameter shell holder rim, so having the correct one in the box saves you a headache.

How do I set neck tension with this die?

Every Zero M-Series die ships with a precision ground .002 neck tension mandrel that sizes the inside of the neck in a single pass. If you want to fine-tune to a different tension, you can add other increments with the Area 419 Mandrel Kit, sold separately.

Can I use this die for other cartridges later?

The Zero M-Series design lets you keep the outer sleeve and purchase just the inner sleeve to change calibers. That makes your initial investment more flexible if you add cartridges to your lineup down the road. This particular die is set up for 6 Creedmoor.

Additional information

UPC

810080181588

Manufacturer

Manufacturer Part Number

419-ZeroDie-M6SH

Shipping Weight

3.29

Reviews

There are no reviews yet.

Be the first to review “Area 419 Zero M-Series 6 Creedmoor Sizing Die 1-1/4″ w/ Shell Holder”