$500.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Area 419 built the Zero M-Series Sizing Die for the reloader who's tired of chasing shoulder bump and inconsistent neck tension. It's a full-length, neck-to-extractor sizer for 6.5 Creedmoor that works as part of the ZERO ecosystem rather than as a standalone piece, and it ships with the Zero shell holder it needs to run. One of the big draws is the micrometer-adjustable headspace, which lets you dial in precise shoulder bump and come back to the same setting every time instead of fiddling with a locknut and crossing your fingers.
Neck tension is handled from the inside with a precision-ground expander mandrel. The die comes standard with a .002-inch neck tension mandrel, and you can swap in other increments from the Area 419 Mandrel Kit if you want to tune things tighter or looser. Because the mandrel has a long bearing surface, it sizes the full length of the neck in one pull, which is where a lot of that consistency reloaders rave about comes from. The sizing sleeve is reamer cut to exact dimensions for a true size, so you don't get that sticky bolt that shows up after a couple firings with brass that isn't being worked all the way down.
This die sizes all the way to the extractor groove, includes hydraulic shoulder pressure relief to help prevent hydraulic dents, and uses spring ejection for spent primers with replaceable steel decap pins. It's also 100% made in America, and the fit and finish lives up to the price tag.
This is a 1-1/4-inch die and requires a Hybrid or 1-1/4-inch turret on your ZERO or other press. It will not run on a 7/8-inch turret or standard 7/8-inch press, and it needs the larger-diameter Zero M-Series shell holder rim to function, which is why this package includes it. If you're already running a ZERO press, this slots right into your setup and gives you one of the most repeatable sizing experiences out there.
This is a 1-1/4-inch die, so it requires a Hybrid or 1-1/4-inch turret on your ZERO or other press. It will not work with a 7/8-inch turret or a standard 7/8-inch press. If you're already set up with the larger turret, it drops right in.
Yes. This package includes the Zero M-Series shell holder, which has a larger-diameter rim than standard shell holders. The die will not function with a standard shell holder, so having the correct one is essential, and it's covered here.
Neck tension is set from the inside using a precision-ground expander mandrel with a long bearing surface that sizes the full neck in one pull. The die ships with a .002-inch neck tension mandrel standard. If you want other tension increments, you can pick up the Area 419 Mandrel Kit and swap mandrels as needed.
Yes, and this is one of the die's standout features. The micrometer headspace adjustment lets you set precise shoulder bump and return to the exact same setting every time. Combined with the full neck-to-extractor sizing, it helps eliminate the sticky-bolt feel some reloaders get a couple firings in.
| UPC | 810080181618 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-ZeroDie-M65CrSH |
| Shipping Weight | 3.3 |
You must be logged in to post a review.
Reviews
There are no reviews yet.