0
0

Area 419 ZERO M-Series Die Sleeve & Mandrel Kit 6.5×47 Lapua

UPC: 810080182905

$160.00

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The whole idea behind the Area 419 ZERO M-Series system is modularity, and this kit is where that really pays off. If you already run an M-Series sizing die, these inserts let you add 6.5×47 Lapua to your bench by swapping the internal parts instead of buying a second complete die. The sizing sleeve inside is the exact same one Area 419 builds into their factory-assembled dies, so nothing changes about the quality or the dimensions you get when sizing.

What the 6.5×47 Sleeve and Mandrel Kit Does

You get one sizing sleeve cut for 6.5×47 Lapua, which fully sizes the case body down toward the extractor area for clean, consistent chambering trip after trip. Paired with that is a full-length ground mandrel that delivers roughly .002 inches of neck tension, matching the setup that ships in the complete dies. That mandrel step happens as you size, so you skip the separate mandrel pass a lot of folks run on a second tool. An extra spring-loaded decapping pin rounds out the package for uninterrupted case prep.

Fitting the Kit Into Your Area 419 M-Series Die

This is a replacement insert set, not a standalone die, so you need to already own an Area 419 ZERO M-Series die to put it to work. The M-Series platform is built around reamer-cut sizing chambers, micrometer-adjustable headspace for repeatable shoulder bump, and the modular sleeve design that makes caliber changes like this one possible. Reloaders who run several cartridges tend to love the system for exactly this reason, since one outer die body can cover a whole lineup of chamberings.

For anyone chasing the kind of low runout and repeatable neck tension that 6.5×47 Lapua shooters live for, this is a straightforward way to grow what your M-Series die can handle.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419ZeroDieSM6547
  • UPC: 810080182905
  • Caliber: 6.5×47 Lapua
  • Product Type: Replacement Sizing Inserts for ZERO M-Series Dies
  • Neck Tension: Approx. .002 inches
  • Mandrel: Full-Length Ground
  • Sizing: Full-Length Body Sizing
  • Requires: Existing Area 419 ZERO M-Series Die
  • Shipping Weight: 0.676 lbs

What’s Included

  • One 6.5×47 Lapua sizing sleeve
  • One full-length ground mandrel (approx. .002" neck tension)
  • One extra spring-loaded decapping pin

Frequently Asked Questions

Do I need to already own an Area 419 M-Series die to use this kit?

Yes. This is a set of replacement sizing inserts, not a complete die, so it only works if you already run an Area 419 ZERO M-Series sizing die. The sleeve and mandrel install into your existing die body to change or restore it for 6.5×47 Lapua.

Is the sizing sleeve in this kit the same as what comes in a complete M-Series die?

It is. Area 419 builds these inserts to match the internal sleeves that ship inside their factory-assembled M-Series dies. You get the same reamer-cut sizing dimensions and quality without buying a whole new die.

How much neck tension does the included mandrel give?

The full-length ground mandrel delivers approximately .002 inches of neck tension, which is the same standard setup found in the complete dies. Since the mandrel sizes the neck as you run the case through, you can skip a separate mandrel step on another tool.

Can I use one M-Series die body for multiple calibers with kits like this?

That's the whole point of the modular design. You can keep one outer die and swap in sleeve and mandrel kits for different cartridges, so this 6.5×47 Lapua set lets you add that chambering to a die you already own.

Additional information

UPC

810080182905

Manufacturer

Manufacturer Part Number

419ZeroDieSM6547

Caliber/Gauge

6.5x47mm

Shipping Weight

0.676

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO M-Series Die Sleeve & Mandrel Kit 6.5×47 Lapua”