$145.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 Hellfire 2P takes the guesswork out of running a muzzle brake. This is a two-port, self-timing design built for semi-auto and hunting rifles wearing barrels of 20 inches or less, and it comes with a dedicated 9mm universal adapter cut for 1/2-28 threads. Where a lot of brakes have you fiddling with shims or crush washers to get the ports lined up level, the Hellfire system does the timing for you. Machined from heat-treated 17-4PH stainless with a black nitride finish, it's built to hold up to serious round counts and it's made in NW Ohio start to finish.
The magic here is the universal adapter. You torque the adapter onto your threaded barrel once with a 5/8-inch wrench and it stays put for good. From there the brake and collar assembly left-hand thread on until snug, then you rotate the brake level, push it into the adapter so it locks onto the taper, and hand-tighten the knurled collar. No tools to time it, and the brake won't spin out of position as you lock it down. That taper surface works a lot like a machine-tool spindle, so alignment stays true and your return to zero is excellent when you remove and reinstall.
The two ports are angled slightly rearward, which is what gives you that balance of strong recoil reduction without beating up the person behind the gun. Folks running these on a .308 have reported felt recoil dropping by roughly half, with minimal back blast coming toward the bench. It sits at 1 inch OD with a 1.1-inch collar, which keeps it inside the 3-Gun limited class standard, and the whole assembly adds about 2 inches to your barrel's overall length.
One of the best parts of buying into the Hellfire line is flexibility down the road. The same adapter platform plays nice with Area 419 suppressor mounts, so you can swap from brake to can in seconds without tools. Pick up extra adapters in the thread pitch you need and you can move one brake across several rifles. It's a smart system for anyone building out more than one setup.
You torque the universal adapter onto your barrel once and leave it there. The brake then threads onto the adapter and locks onto a precision taper, so it always seats level and clocked correctly. The knurled collar tightens by hand, and the brake won't rotate out of position while you lock it down.
Yes, return to zero is one of the standout features of the Hellfire system. Because the brake indexes off that same machined taper every time, removing and reinstalling it doesn't require a zero change. That makes it easy to pull for cleaning or to swap in a suppressor mount.
This model is designed for semi-auto and hunting rifles with barrels of 20 inches or less and comes cut for 1/2-28 threads. The 9mm bore is oversized enough to run a range of bullet diameters up to .358. It's a common thread pitch on .223, 5.56, and many pistol-caliber and rimfire builds, so confirm your barrel's threads match before ordering.
You can. Area 419 suppressor mount adapters are compatible with the Hellfire 2P platform, so you can switch from brake to can in seconds without tools. Buying extra universal adapters also lets you move a single brake between multiple rifles.
| UPC | 850002933529 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419HF2P-9MM-1228 |
| Shipping Weight | 0.33 |
You must be logged in to post a review.
Reviews
There are no reviews yet.