$145.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 Hellfire 2P is a two-port self-timing muzzle brake built for barrels threaded 1/2-28 and bored for 223 and 6mm calibers, which covers anything up to and including .243 like 223, 5.56 NATO, 204, and even 17 cal. It's tuned for semi-automatic and hunting rifles running 20 inch barrels or shorter, so it's a natural fit on an AR-15, a lightweight bolt gun, or a 6mm ARC build. The whole idea here is real recoil control that doesn't beat you up behind the gun.
The magic is the self-timing adapter system. You torque the universal adapter onto your barrel once with a 5/8 wrench and it never has to come off again. The brake threads onto that adapter, locks onto a machined taper, and the knurled collar snugs down by hand with no tools needed. Because the brake body won't rotate as you tighten, the ports land level every single time, and return to zero after removal is excellent. That means you can pull the brake to run a suppressor mount or swap it between rifles without losing your reference.
The Hellfire 2P uses slightly rearward-facing ports and a proprietary port geometry that knocks down muzzle rise without any top porting, so your sight picture stays flat and you can spot your own hits. It's machined from heat-treated 17-4PH stainless steel on CNC equipment in northwest Ohio and finished in black nitride, which shrugs off carbon and cleans up easier than raw stainless. The face is engraved with the caliber to mark the top for correct orientation, plus a horizontal line to help you level it.
This brake is part of Area 419's modular Hellfire family, so it shares the same universal adapters used across their other brakes, suppressor mounts, and flash suppressors. If you're already running the Hellfire system, adding this one to another rifle is about as painless as it gets. It's a favorite among precision and competition folks for good reason.
This version handles any bullet caliber up to and including .243 (6mm). That covers 223, 5.56 NATO, 6mm ARC, 204, and 17 cal, so it's a versatile choice across a lot of small-bore builds. Just make sure your barrel is threaded 1/2-28 to match this model.
You torque the universal adapter onto your barrel once with a 5/8 wrench and leave it. The brake threads onto that adapter and locks onto a machined taper, then the knurled collar tightens by hand with no tools. Since the brake body won't rotate while you torque it down, the ports end up level every time without any shims or timing washers.
Yes, return to zero is one of the strong points of this system. Because the brake indexes off a precision taper on the adapter, you can remove it to run a suppressor mount or move it to another rifle and it goes right back to where it was. That repeatability is a big reason folks run the Hellfire system across multiple guns.
Preventative maintenance is the easy path here. Clean the brake whenever you clean the barrel, roughly every 200 to 400 rounds and a bit sooner for 6mm, and it stays manageable. A soak in a carbon cleaner like Boretech C4 lifts the buildup out, and the black nitride finish makes that cleanup even simpler.
| UPC | 853675008747 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419HF2P-223-1228 |
| Shipping Weight | 0.34 |
You must be logged in to post a review.
Reviews
There are no reviews yet.