$170.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Recoil is the enemy of a good follow-up shot, and the Area 419 Hellfire Self-Timing Muzzle Brake was built to gut it. In independent side-by-side testing against the top brakes on the market, the Hellfire showed roughly 52% recoil reduction on a 6.5 Creedmoor test rifle, coming in about 4% better than one of the most popular brakes out there. That kind of reduction means you stay in the scope, watch your hits land, and get back on target without a hard reset between rounds. This version is the 6.5mm bore in raw stainless with a 5/8-24 thread adapter.
Most brakes make you fuss with shims or crush washers to get the ports level. The Hellfire skips all that. You torque the universal adapter onto your barrel with a 5/8 inch wrench and leave it there. The brake and collar assembly then thread on and lock to a taper, and a simple knurled nut times everything without a single tool. The brake will not spin as you tighten the collar, so there is no guessing where the ports will end up once it is snug.
One of the real perks here is that pulling the brake and reinstalling it does not shift your zero. That makes it easy to swap between the brake and a suppressor or to pull it for cleaning and storage without a re-zero session at the range. The 6.5mm bore handles any bullet up to and including .264, so it covers 6.5 Creedmoor, 6.5 PRC, .260, and the rest of that family, magnums included.
The ports are rear-facing to maximize recoil reduction, and the proprietary design tames muzzle rise without top porting. The face is engraved with the caliber to mark the top for correct orientation, plus a horizontal line to help you level it. Everything is CNC machined in NW Ohio and made 100% in the USA, which is a big part of why these things have earned such a loyal following among precision and hunting shooters alike.
The 6.5mm bore is rated for any bullet up to and including .264 diameter. That covers cartridges like 6.5 Creedmoor, 6.5 PRC, .260 Remington, and 6.5 Grendel, and magnums are fine. If you are running something with a bullet larger than .264, you would want the 7mm/30cal version instead.
No. The self-timing design uses an independent collar and a knurled nut that hand-time the ports level, so there are no shims or crush washers involved. The brake will not rotate as you snug the collar, which takes all the guesswork out of getting the ports lined up straight.
Return to zero on the Hellfire is excellent, so pulling the brake and reinstalling it will not require you to re-zero. That makes it convenient for cleaning, storage, or swapping over to a suppressor that uses a Hellfire mount. You just torque the adapter on once and leave it, then the brake locks and unlocks off that adapter.
In independent side-by-side testing, the Hellfire showed around 52% recoil reduction on a 6.5 Creedmoor test rifle. That put it roughly 4% ahead of one of the most popular brakes on the market. The rear-facing ports also control muzzle rise so you can spot your own impacts and stay ready for the next shot.
| UPC | 810080180130 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419HF-SS-6.5MM-5824 |
You must be logged in to post a review.
Reviews
There are no reviews yet.