$170.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 Hellfire in .338 stainless with a 5/8-24 adapter is built for people running big magnums who are tired of getting punished by recoil. It handles anything up to and including .338, which covers 338 Win Mag, 338 Lapua, 338 Norma, and 338 Edge. The rearward-facing ports and proprietary design pull felt recoil way down while keeping the muzzle flat, and Area 419 says independent side-by-side testing showed the Hellfire delivering better recoil reduction than one of the most popular brakes on the market. The face is engraved with the caliber to mark the top and includes a horizontal line to help you get it level.
The headline feature is the self-timing collar. You torque the universal adapter onto your barrel once with a 5/8 wrench and leave it there for good. From there you left-hand thread the brake and collar onto the adapter, rotate it until it sits level, push it in until it locks onto the taper, and hand-tighten the collar. That is the whole job. No shims, no crush washers, no peel washers, and no wondering where the ports will line up when you snug it down. The brake will not spin as you lock the collar.
Because the adapter stays put, return to zero is excellent, so pulling the brake for cleaning or travel and reinstalling it will not shift your zero. That modular setup is also why folks like this system so much for suppressor work. Same mount, so you can move a can between rifles that share the Hellfire adapter without a fuss.
This one is the raw stainless version, machined from heat-treated 17-4PH stainless steel on CNC equipment in NW Ohio and made in the USA. It is a serious piece of hardware for a serious cartridge, and the fit and finish reflect that. If you are recoil-sensitive on a hard-kicking magnum or just want to stay in the glass to spot your own hits, this brake earns its keep.
It is rated for any bullet up to and including .338, so it covers 338 Win Mag, 338 Lapua, 338 Norma, and 338 Edge, along with anything smaller. Keep in mind 5/8-24 is the max thread size offered in this caliber. If your barrel is threaded differently, you would need the correct universal adapter to match.
Nope. This is a self-timing brake, so there are no shims, crush washers, or peel washers involved. You torque the universal adapter to your barrel with a 5/8 wrench, thread the brake and collar on, rotate it level, lock it onto the taper, and hand-tighten the collar. The brake will not spin while you tighten it down.
Yes. This SKU includes one Hellfire universal adapter in 5/8-24, which is what threads onto your barrel. The brake body then locks onto that adapter, and you can add more adapters later if you want to run the same brake or suppressor across multiple rifles.
Return to zero on the Hellfire is excellent because the universal adapter stays torqued to your barrel and never comes off. You can pull the brake for cleaning or transport and reinstall it without needing to re-zero. That same design is why it plays nicely with suppressor mounts on the Hellfire system.
| UPC | 810080180932 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419HF-SS-338-5824 |
You must be logged in to post a review.
Reviews
There are no reviews yet.