$100.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you already run Hellfire brakes on your rifles but your suppressor wears a SilencerCo Charlie-pattern mount, this little piece of steel is the bridge you have been looking for. The Area 419 SiCo Charlie/Saker adapter replaces the entire ASR assembly in the back of your can, letting a SilencerCo Saker, Chimera, or Omega 36M drop right into the Hellfire self-timing system. Pull your Hellfire brake, thread this mount into the suppressor, and your can now spins onto the Hellfire Universal Adapter like it was built for it.
This is a Generation 2 mount, which means there is no collar like you would find on the muzzle brake. The adapter torques directly into the suppressor, effectively turning your can into a left-hand direct-thread unit that mates with the Hellfire Universal Adapter. The payoff is a much more compact interface that adds very little length to the whole system, a big deal when you are already hanging a full-size can off a precision rifle. One installation note worth knowing up front: the small silver or gold factory insert inside your suppressor needs to come out first. It pulls out by hand, though carbon buildup can make it a bit stubborn. Area 419 also recommends a drop of blue thread locker on the external threads so the mount stays put in the can, since you will be threading left-hand onto the barrel adapter from here on out.
The stainless version is machined from heat-treated 17-4PH stainless and finished in black nitride to fight galling, while the titanium option is cut from US-made 6AL4V with a DLC coating. Threads are cut to meet manufacturer specs, so lockup is tight and repeatable every time you swap the can between rifles. For anyone who has bought into the Hellfire system, this adapter is the piece that ties your SilencerCo can into the whole quick-swap ecosystem without giving up length or precision.
It fits SilencerCo cans that use the Charlie mount pattern, including the Saker, Chimera, and Omega 36M. The adapter replaces the entire ASR assembly in the rear of the suppressor. Note that the Hellfire Universal Adapter for your barrel is sold separately and is not included with this mount.
Yes, there is a small silver or gold factory insert inside the can that has to come out before the adapter goes in. It pulls out by hand, though carbon fouling can bind it in place if the can has some rounds through it. Once that insert is out, the adapter torques directly into the suppressor.
Because the Gen 2 design threads the can onto the Hellfire Universal Adapter in a left-hand direction, an under-torqued mount could back out of the suppressor when you attach it to the barrel. A drop of blue thread locker on the external threads holds it semi-permanently in the can. If it ever does loosen, the opposing thread directions make it impossible for the parts to lock up, so you just back it off and reinstall.
Very little. The Gen 2 design skips the collar used on the Hellfire muzzle brake and torques straight into the can, keeping the interface compact. Most people find the overall length change barely noticeable compared to the factory ASR mount.
| UPC | 853675008457 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419ADT_SAKER |
| Shipping Weight | 0.39 |
You must be logged in to post a review.
Reviews
There are no reviews yet.