$100.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Hellfire Self Timing Brake system is one of the slickest muzzle setups in precision shooting, and this Gen2 mount adapter is what brings your SilencerCo Harvester 30 into the fold. Spin the Hellfire brake off, thread your can with this mount installed onto the Universal Adapter, and you go from braked to suppressed in seconds without ever touching your muzzle threads. That means consistent alignment, repeatable point of impact, and no fiddling with shims or crush washers at the range.
The big improvement with the Gen2 design is the elimination of the collar found on the original mounts and the Hellfire brake itself. This adapter torques directly into your suppressor, essentially turning your can into a direct thread unit that spins onto the Hellfire Universal Adapter via left-hand threads. The result is a noticeably more compact package that adds very little length to your overall setup, which matters when you are already hanging a full-size can off a long barrel. Area 419 recommends a dab of blue thread locker on the external threads to keep the mount seated semi-permanently in the suppressor, and since the thread directions oppose each other, there is no way to get the two permanently stuck. Fit-wise, this mount covers the SilencerCo Harvester 30 as well as the Omega 9K.
This mount is machined from aerospace grade 17-4PH stainless steel and treated with a black nitride finish to fight galling, which is exactly what you want on threads that see heat, carbon, and repeated on-and-off cycles. Area 419 machines these to match the suppressor manufacturer's specs, and the included wrench makes torquing the mount into your can straightforward. If you have been running a Hellfire brake and want your Harvester in the rotation without dedicating it to one rifle, this is the missing piece.
This mount is made for the SilencerCo Harvester 30 and also fits the SilencerCo Omega 9K. It torques into the suppressor's rear mount threads and then attaches to the Area 419 Hellfire Universal Adapter on your barrel. Keep in mind you still need the Hellfire Universal Adapter installed on your muzzle for this to work.
The Gen2 design ditches the collar used on the original mounts and the Hellfire brake. Instead, the adapter torques directly into your suppressor, effectively making it a direct thread can for the Hellfire Universal Adapter. This keeps the setup more compact and adds barely any length to the system.
Area 419 recommends blue thread locker on the external threads to hold the mount semi-permanently in your suppressor. Since the can threads onto the Universal Adapter in a left-hand direction, a loose mount could back out when attaching it to the barrel. If that happens, the opposing thread directions mean nothing gets stuck, just back it off and re-torque.
The self-timing Hellfire system is designed for repeatable alignment, and users consistently report no loss of accuracy or point of impact shift when running these mounts. The 17-4PH stainless construction and black nitride finish keep the threads concentric and resistant to galling over repeated mounting cycles.
| UPC | 853675008464 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419ADT_HVSTR |
| Shipping Weight | 0.32 |
You must be logged in to post a review.
Reviews
There are no reviews yet.