0
0

Area 419 ZERO S-Series 300 Win Mag 7/8″ Full-Length Sizing Die

UPC: 810080183834

$278.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Area 419 ZERO S-Series 300 Win Mag die takes the features that made the flagship M-Series a hit on the precision bench and packs them into a traditional 7/8" body. Area 419 built this one after years of reloading, feedback from thousands of customers, and plenty of trial and error, and the result is a full-length sizing die that fits standard presses without asking you to overhaul your whole setup. The bodies are reamer cut to exacting dimensions for a true size, which means you leave behind that frustrating sticky bolt that tends to show up after a case has been fired a couple of times.

What Sets the ZERO S-Series 300 WM Die Apart

This die runs a precision ground expander mandrel for dialing in consistent neck tension. It ships with a .002 neck tension mandrel, and if you want to experiment with different tension increments you can pick up the separate Area 419 Mandrel Kit. The mandrel is built right into the full-length sizing process, so you get neck work and body sizing in one pull of the handle instead of breaking it into a separate step. Spring ejection clears spent primers cleanly, the steel decap pins are replaceable when you need them, and a hydraulic shoulder pressure relief system helps keep your brass alive longer by easing stress on the shoulder.

Fitting the 300 Win Mag S-Series Die Into Your Setup

Keep in mind this is a die-only product, so there is no shellholder in the box. The good news is it plays nice with common shellholders from Redding, Hornady, RCBS, and the like, and it also works with the Area 419 ZERO Modular Shellholder System if you run their gear. It threads into standard presses, which is exactly what makes the S-Series so easy to drop into an existing bench. Every die is machined in America, and the handful of reloaders who have run these across hunting and precision loads consistently come back impressed with the neck tension consistency and how smoothly the shoulder bump sets up.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-ZERODIE-S300WM
  • UPC: 810080183834
  • Caliber: 300 Winchester Magnum
  • Die Type: Full-Length Sizing Die
  • Series: ZERO S-Series
  • Thread: 7/8"-14 (standard)
  • Included Mandrel: .002 neck tension expander mandrel
  • Primer Ejection: Spring ejection
  • Decap Pins: Replaceable steel
  • Shoulder Relief: Hydraulic shoulder pressure relief
  • Country of Origin: Made in USA

What’s Included

  • Area 419 ZERO S-Series 300 Win Mag sizing die
  • ZERO Universal Die Ring
  • .002 neck tension expander mandrel
  • Spare decapping pin
  • Necessary install/removal tools

Frequently Asked Questions

Does the Area 419 S-Series 300 Win Mag die come with a shellholder?

No, this is a die-only product with no shellholder included. It is compatible with common shellholders from Redding, Hornady, RCBS, and similar brands, so most reloaders already have what they need. It also works with the Area 419 ZERO Modular Shellholder System if you run their setup.

Will this die fit a standard reloading press?

Yes. The ZERO S-Series uses a traditional 7/8"-14 threaded body designed to fit standard presses, which is one of the main reasons Area 419 created it. That makes it an easy upgrade without having to switch over to a proprietary press.

What is the difference between the S-Series and the M-Series dies?

The S-Series brings over the core features of the flagship M-Series but leaves out the micrometer headspace adjustment to simplify the design and keep the cost down. It uses a standard method for setting headspace instead, while keeping the reamer-cut true sizing, interchangeable expander mandrel, and spring-loaded decapping. It also fits standard presses, which widens its usability compared to the M-Series.

Does the 300 Win Mag S-Series die handle neck tension?

Yes. It ships with a precision ground .002 neck tension expander mandrel that works right into the full-length sizing process. If you want to dial in different tension increments, Area 419 offers a separate Mandrel Kit that gives you additional options.

Additional information

UPC

810080183834

Manufacturer

Manufacturer Part Number

419-ZERODIE-S300WM

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series 300 Win Mag 7/8″ Full-Length Sizing Die”