0
0

Area 419 ZERO S-Series .22 Creedmoor Full-Length Sizing Die

UPC: 810080183216

$275.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 took everything reloaders loved about their flagship M-Series sizer and packed as much of it as possible into a traditional 7/8" die body. The result is the ZERO S-Series .22 Creedmoor Sizing Die, a tool built for handloaders chasing tight numbers on the chrono and uniform neck tension across every piece of brass. It does full-length, neck-to-extractor sizing with a reamer-cut chamber ground to exacting dimensions, which means your .22 Creedmoor cases come out truly on spec and you stop fighting that sticky bolt after a couple of firings.

What Sets the ZERO S-Series Sizing Die Apart

The heart of this die is its precision-ground expander mandrel. Rather than relying on a traditional expander ball, the mandrel sizes the neck from the inside as the final step, giving you square, consistent results. Each die ships with a .002" neck tension mandrel, and if you want to fine-tune your grip, the separate ZERO Mandrel Kit lets you dial in neck tension in half-thousandth increments. Folks who normally run mandrel work as its own separate step have found the built-in mandrel delivers the same uniform tension in one pass.

Features That Earn a Spot on the Bench

Spring ejection clears spent primers cleanly, and the steel decapping pins are replaceable when they eventually wear. The die also uses hydraulic shoulder pressure relief, which helps vent trapped sizing lube and cuts down on hydraulic dents while promoting consistent shoulder bump. Internals are reamer-cut nitrided stainless for smooth, long-lasting operation, and the whole thing is 100% made in America.

Fitting the .22 Creedmoor Die to Your Press

This is a die-only product, so it does not include a shellholder. It works with common shellholders from Redding, Hornady, RCBS and others, along with the Area 419 ZERO Modular Shellholder System. Reloaders coming from other premium die brands consistently note the interior finish and overall quality put this one in a different class, and that it genuinely makes sizing brass easier.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-ZERODIE-S22CR
  • UPC: 810080183216
  • Model: ZERO S-Series Sizing Die
  • Caliber: .22 Creedmoor
  • Die Style: Full-Length Sizing Die
  • Body Thread: 7/8"-14 (standard)
  • Included Mandrel: .002" neck tension
  • Material: Nitrided 17-4 Stainless Steel internals
  • Decapping Pin: Replaceable steel
  • Country of Origin: United States
  • Category: Reloading Dies

What’s Included

  • ZERO S-Series .22 Creedmoor Sizing Die
  • Area 419 ZERO Universal Die Ring
  • .002" neck tension mandrel (installed)
  • Spare decapping pin
  • Install and removal tools

Frequently Asked Questions

Does the ZERO S-Series .22 Creedmoor die come with a shellholder?

No, this is a die-only product and does not include a shellholder. It works with common shellholders from Redding, Hornady, RCBS and similar brands, as well as the Area 419 ZERO Modular Shellholder System. You will need to supply the correct shellholder for your press and the .22 Creedmoor case head.

How does neck tension work on this die?

The die uses a precision-ground expander mandrel that sizes the neck from the inside as the final step, which produces very consistent tension. It ships with a .002" neck tension mandrel installed. If you want to tune your tension further, the separate ZERO Mandrel Kit adds half-thousandth increments so you can land exactly where your load likes it.

Will this die fit a standard reloading press?

Yes, the ZERO S-Series uses a traditional 7/8"-14 die body, so it threads into standard single-stage and turret presses. It includes the Area 419 ZERO Universal Die Ring plus the tools you need to install and adjust it. Keep in mind that press designs vary, so confirm you have enough adjustment range for proper shoulder bump in your particular setup.

What makes the ZERO S-Series different from a standard sizing die?

It brings the premium features of Area 419's M-Series sizer into a conventional 7/8" body. You get full-length neck-to-extractor sizing, a reamer-cut chamber ground to true spec, spring-loaded spent primer ejection, and hydraulic shoulder pressure relief that helps vent trapped lube. The nitrided stainless internals give it a smooth, polished interior finish that reloaders consistently call out.

Additional information

UPC

810080183216

Manufacturer

Manufacturer Part Number

419-ZERODIE-S22CR

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series .22 Creedmoor Full-Length Sizing Die”