0
0

Area 419 Maverick Gen 2 K 6.5mm Titanium Suppressor 5/8×24 HUB

UPC: 810080184664

$1,514.99

22 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The original Maverick changed the conversation for match rifles back in 2019, and it went on to rack up more PRS wins than any other suppressor out there. The Gen 2 takes everything that made that first can special and tightens it up. This K version in 6.5mm is the shorter of the two lengths, giving you a fully welded titanium stack that carries a magnum rating and mounts up via an industry standard HUB rear thread. That HUB compatibility is a big deal if you already run direct thread or quick-detach mounts, since your existing adapters thread right into the back of the can.

What Makes the Maverick Gen 2 Different

Area 419 reworked the internal geometry from the ground up, adding venting ports and improving forward gas flow so the can runs quieter while still feeding the integrated brake enough gas to do its job. The result is a system that keeps the same vertical control the Gen 1 was known for while trimming linear recoil by around 9%. Spotting your own impacts through the scope on a 6.5 Creedmoor gets a whole lot easier when the rifle barely moves.

One Can, Multiple Setups on the 6.5 Maverick Gen 2 K

Modularity is the whole point here. Run the stack with the included end cap when you want the shortest, lightest setup for hunting, or thread on the nitrided stainless Gen 2 brake when you are on the clock at a PRS or NRL Hunter match and want maximum recoil control. Swapping between configurations takes minutes, and the included Hellfire universal adapter in 5/8×24 gets you mounted with self-timing convenience right out of the box. If you want one suppressor that pulls double duty between the mountain and the match line, this is the one that keeps showing up on winning rifles.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-MAV2-65K
  • UPC: 810080184664
  • Caliber: 6.5mm
  • Configuration: K (Short) Length
  • Material: Fully Welded Titanium Stack
  • Mount Type: HUB 1.375×24 Rear Thread
  • Included Adapter Thread: 5/8"x24
  • Diameter: 1.72 in
  • Rating: Magnum Rated
  • Brake: Maverick Gen 2, Nitrided Stainless Steel

What’s Included

  • Maverick Gen 2 modular suppressor stack (K length)
  • Hellfire HUB suppressor adapter (installed in stack)
  • Hellfire universal adapter, 5/8"x24
  • Maverick Gen 2 brake in nitrided stainless steel
  • Maverick Gen 2 end cap for the shortest non-braked configuration
  • 2 Maverick Gen 2 wrenches

Frequently Asked Questions

Will the Maverick Gen 2 work with mounts I already own?

Very likely, yes. The Gen 2 uses a standard HUB rear thread (1.375×24), so most HUB-pattern direct thread and quick-detach adapters screw straight into the back of the can. It also ships with a Hellfire universal adapter in 5/8×24, so you are covered right out of the box if your barrel is threaded that way.

What is the difference between the K length and the full-size Maverick Gen 2?

The K is the shorter, lighter version of the Gen 2 stack. You give up a little sound suppression compared to the longer can, but you gain a more compact package that balances better on hunting rifles and shorter barrels. Both versions share the same welded titanium construction, magnum rating, and HUB mounting.

Do I have to run the brake, or can I shoot it suppressed only?

You can run it either way. The kit includes a dedicated end cap for the shortest non-braked configuration, which is the setup most folks use for hunting. Thread the Gen 2 brake on when you want maximum recoil reduction for match work, where it trims linear recoil by roughly 9% over the Gen 1 brake while keeping the same vertical control.

Is the 6.5mm Maverick Gen 2 magnum rated?

Yes, the Gen 2 carries a magnum rating thanks to its fully welded titanium stack. That makes it a solid pick for hotter 6.5 cartridges like the 6.5 PRC, not just 6.5 Creedmoor. Keep in mind the 6.5mm bore means it handles 6.5mm and smaller calibers only, so it will not work on a .30 caliber rifle.

Additional information

UPC

810080184664

Manufacturer

Manufacturer Part Number

419-MAV2-65K

Caliber/Gauge

6.5MM

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Area 419 Maverick Gen 2 K 6.5mm Titanium Suppressor 5/8×24 HUB”