$15.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 .25 Cal Funnel Head is the dedicated piece you add to your existing Area 419 funnel setup when you're loading .25 caliber cases. This is the head only, so the funnel body, handle, and storage block are not part of this listing. It's a simple swap that threads onto the funnel you already own and gives you a neck-specific interface built for one job and one job well.
What makes this system different from the plastic funnels most of us grew up with comes down to the material and the machining. It's cut from solid 6061-T6 aluminum, which means no static charge pulling kernels to the walls and no tapping the funnel to shake loose a few stragglers. The head is sized slightly larger than the case neck diameter so it sits solid on the brass instead of trying to fit over the body of the case. Inside, the bore runs a few thousandths under bullet diameter, so you get maximum flow for the caliber without powder packing up at the neck.
The heads are interchangeable and color coded, so swapping between calibers on the same funnel body takes seconds. The interface between the head and the funnel is cut so no kernels wedge between the two, as long as you snug it down fully. There's a short straight section up top to keep powder from bouncing back out when you pour, and internal flutes that break up any tendency for kernels to jam at the nozzle.
Area 419 machines these in house from USA aluminum on a USA mill with USA cutting tools, and the fit and finish show it. If you're already running the Area 419 funnel and you've added .25 caliber to your bench, this head rounds out your kit and keeps your charging consistent round after round. Smooth internal surfaces mean quick flow and clean handling every time you work a load.
No, this listing is for the caliber-specific head only. The funnel body, handle, and storage block are sold separately. You'll want to already own the Area 419 billet powder funnel for this head to thread onto.
It's machined from 6061-T6 aluminum, so it doesn't build up a static charge that clings powder kernels to the walls. The neck-specific sizing holds solid on the case rather than fitting over the body, and the internal bore and flutes keep powder flowing without packing up at the neck. That also makes it safer for use with black powder.
Yes, the Area 419 heads are interchangeable and color coded so you can swap calibers on the same funnel body in seconds. Each head is cut for a specific neck diameter, so you just thread on the one that matches the caliber you're loading. Snug it down fully and no kernels get caught in the interface.
It's made in the USA. Area 419 machines these in house from domestic aluminum on a USA-built HAAS mill using USA cutting tools, which shows in the fit and finish.
| UPC | 850002933680 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-FN-HEAD-25 |
| Shipping Weight | 0.045 |
You must be logged in to post a review.
Reviews
There are no reviews yet.