0
0

Area 419 Billet Loading Block 0.452″ ARC/Grendel Clear Anodized

UPC: 810080182769

$55.00

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built this loading block for people who spend real time at the reloading bench and want a tray that holds up. It is machined in house from 6061-T6 aluminum and given a clear anodized finish, so it shrugs off the knocks and spills that come with regular use. The 0.452" pocket size is cut for the ARC and Grendel bolt face family, which covers cartridges like 6mm ARC and 6.5 Grendel that share that same case head.

What the Area 419 0.452" Block Does on the Bench

Each block holds 50 rounds, and the pockets are bored a half inch deep with a tight fit around the case so your brass stands upright instead of tipping while you work. The bottom of every hole has a small divot machined into the center. That little detail catches stray powder kernels and keeps them from piling up where a primer could sit, which is a thoughtful touch you do not see on most trays.

Why the Billet Construction Matters

Plenty of loading blocks are molded plastic that flexes and wears out. This one is solid billet aluminum, so it stays flat and dimensionally stable load after load. It measures roughly 9.5 by 4 inches and about 5/8 inch thick, weighing in around 1.4 pounds, so it has enough heft to stay put without taking over your bench. Rubber pads on the underside grip the surface and stop the block from sliding when you are seating bullets or working through a batch.

If you are loading 6mm ARC, 6.5 Grendel, or anything else riding that 0.452" case head, this is a tray that matches the quality of the rest of your setup and should last for years of handloading. Made in the USA.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-BASIC-ARC
  • UPC: 810080182769
  • Pocket Diameter: 0.452 in (ARC/Grendel bolt face)
  • Round Capacity: 50
  • Material: 6061-T6 Aluminum
  • Finish: Clear Anodized
  • Pocket Depth: 0.500 in
  • Dimensions: 9.5 in x 4 in x 5/8 in
  • Weight: 1.4 lbs
  • Country of Origin: USA

What’s Included

  • Area 419 Billet Loading Block (0.452" ARC/Grendel, Clear Anodized)

Frequently Asked Questions

What cartridges fit the 0.452" Area 419 loading block?

The 0.452" pocket size is cut for the ARC and Grendel bolt face family. That includes cartridges that share that case head, like 6mm ARC and 6.5 Grendel. The measurement refers to the case head size, not the bullet diameter.

How many rounds does the Area 419 Billet Loading Block hold?

This block holds 50 pieces of brass. The pockets are machined a half inch deep with a snug fit around the case so your rounds stand upright and resist tipping while you load.

What is the loading block made of?

It is machined in house from 6061-T6 aluminum and finished with a clear anodize. The billet construction keeps it flat and stable over the long haul, and the anodizing helps it hold up to regular bench use better than a bare or plastic tray.

Does the Area 419 loading block stay put on the bench?

Yes. The underside has rubber pads that grip your work surface and keep the block from sliding around while you seat bullets or work through a batch. Each pocket also has a small divot at the bottom to catch stray powder kernels.

Additional information

UPC

810080182769

Manufacturer

Manufacturer Part Number

419-BASIC-ARC

Reviews

There are no reviews yet.

Be the first to review “Area 419 Billet Loading Block 0.452″ ARC/Grendel Clear Anodized”