Description
The TriggerTech AR .308 Adaptable is a drop-in two-stage trigger built for the AR10 platform and other .308-pattern rifles, and it's the kind of upgrade you notice on the very first shot. TriggerTech's whole thing is eliminating sliding friction, so instead of the gritty takeup you feel on a mil-spec trigger, you get a short, crisp break with genuinely zero creep. The curved lever has a familiar feel for folks coming off a traditional trigger, and the whole two-stage action is designed to feel like a 1911, which is exactly what a lot of precision guys are chasing.
What Makes the AR .308 Adaptable Different
The standout here is the adjustability. Using a small set screw, you can tune the pull weight from 2.5 to 5 pounds in 2-ounce increments, and it clicks with tactile feedback so you know where you're at. What sets it apart from cheaper adjustable triggers is that changing the pull weight doesn't reduce hammer force, so you still get dependable primer strikes whether you're running it light for a bench gun or heavier for a duty setup. Reset is short and forceful, sub 0.015 inches on this model, which makes follow-up shots quicker and more predictable.
Built to Take a Beating
The housing is 7075 aluminum with a hard anodized finish, and the key internal components are hardened 440C stainless steel with a black PVD coating for corrosion resistance. Because the frictionless design doesn't depend on polishing or lubricating the engagement surfaces, the pull stays consistent shot after shot, even after thousands of rounds and in nasty conditions.
Fitting the AR .308 Adaptable to Your Build
This is a self-contained drop-in unit that uses standard mil-spec 0.154-inch pins, which are not included. It's a favorite among AR10 and 6.5 Creedmoor builders, and shooters consistently report groups tightening up after the swap. Install is straightforward if you know your way around a lower, though if you're new to detail-stripping a receiver it's worth having a gunsmith handle it and run the safety checks.
Key Specifications
- Manufacturer: TriggerTech
- Manufacturer Part Number: ART-TBB-25-NNC
- UPC: 885768002172
- Platform: AR .308 / AR10 (and pump action AR)
- Style: Two-Stage
- Trigger Lever: Traditional Curved
- Adjustable Pull Weight: 2.5 to 5 lbs, in 2 oz increments
- Reset: Less than 0.015 inches
- Pin Size: Mil-Spec 0.154 inches
- Housing Material: 7075 Aluminum, hard anodized
- Key Components: 440C Stainless Steel
- Finish: Black PVD
- Design: Drop-In, Frictionless Release Technology
- Orientation: Right
- Warranty: Limited Lifetime
What’s Included
- TriggerTech AR .308 Adaptable two-stage curved trigger (drop-in unit)
Frequently Asked Questions
Does the AR .308 Adaptable trigger come with pins?
No, trigger pins are not included. It's built to use standard mil-spec 0.154-inch pins, which most AR10 and .308 lowers already have. If you're reusing your existing pins from the factory trigger, you'll be set.
What pull weights can I set on this trigger?
You can adjust the total pull weight from 2.5 to 5 pounds in 2-ounce increments using a set screw, with tactile clicks so you know exactly where you land. The nice part is that adjusting the weight doesn't change hammer force, so you keep reliable primer ignition at every setting. Many people find the zero-creep break makes the pull feel around half a pound lighter than the measured weight.
Will this work in an AR10 or 6.5 Creedmoor build?
Yes, this is the AR .308 version, designed for AR10-pattern rifles including popular chamberings like 6.5 Creedmoor and .308 Win. It drops right into standard .308-pattern lowers with 0.154-inch pins. It's a common upgrade for precision and long-range builds on this platform.
Is it hard to install the AR .308 Adaptable trigger?
It's a self-contained drop-in unit, so it goes in as one piece rather than loose parts, which makes it much simpler than a traditional trigger group. If you're comfortable working in an AR lower, most people knock it out in a few minutes and run a function check. If you're not experienced detail-stripping a receiver, it's smart to have a gunsmith handle the install and safety checks.




Reviews
There are no reviews yet.