0
0

Midwest Industries 15″ AR 308 Combat Rail M-LOK Handguard DPMS High Black

UPC: 812102033196

$209.95

22 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .308 platform is heavy by nature, so anything that trims weight without giving up rigidity is worth a look. This 15-inch Combat Rail from Midwest Industries does exactly that with a slim outer diameter, big cooling cutouts, and a full run of M-LOK real estate. It's cut for DPMS high-profile receivers with a .210-inch tang height, so before you order, double-check whether your upper is a high or low pattern. The full-length MIL-SPEC Picatinny top rail is indexed to line up cleanly with your receiver, which makes running a scope, red dot, or backup irons a repeatable, no-guessing setup.

What Sets the 15" Combat Rail Apart

Underneath the sleek profile is a serious mounting system. The handguard clamps to a 4140 heat-treated barrel nut with 1-7/16-16 threads and uses a patented 4140 torque plate along with an aluminum anti-rotation block to lock everything in place. That combination keeps the rail from creeping forward or twisting under recoil, which is what you want when you've got a light, laser, or bipod hanging off the front. Builders consistently report it seats up tight against the receiver with zero rotation once torqued.

Mounting Room on the 308 Combat Rail

You get three sides of M-LOK slots running the length of the rail, plus a five-slot M-LOK Picatinny piece included in the box for anything that still needs a section of 1913. Five anti-rotation QD sling sockets are built in, so you can set up a two-point, single-point, or side sling without adding extra hardware. The internal diameter runs 1.5 inches, which clears most .308 barrel and gas block combos, though a pinned or oversized gas block may need to come off during install.

Installing the Midwest 308 Handguard

Installation is straightforward and the barrel nut wrench comes included, so you won't be hunting for a specialty tool. Midwest packs clear directions in the box, and folks running these on Aero Precision M5, DPMS, and similar large-frame uppers routinely call the process quick and painless. One tip worth knowing: because this is a high-profile rail, plan for taller scope rings or a cantilever mount so your optic clears the top of the handguard.

Key Specifications

  • Manufacturer: Midwest Industries
  • MPN: MICR30815 (MI-CR308-15)
  • UPC: 812102033196
  • Length: 15 inches
  • Platform: AR-308 / LR-308, DPMS High Profile
  • Tang Height: .210 inch
  • Mounting Style: M-LOK (three sides) with full-length Picatinny top rail
  • Material: 6061 aluminum, hardcoat anodized
  • Finish: Black Hardcoat Anodized
  • Barrel Nut: 4140 heat-treated, 1-7/16-16 threads
  • Internal Diameter: 1.5 inches
  • Width: 1.75 inches
  • Height: 2.187 inches
  • Installed Weight: 14.5 oz
  • QD Sockets: Five anti-rotation QD sling sockets
  • Origin: Made in the USA

What’s Included

  • 15" 308 Combat Rail M-LOK handguard
  • 4140 heat-treated barrel nut
  • Patented 4140 heat-treated torque plate
  • Aluminum anti-rotation block
  • Five-slot M-LOK Picatinny rail section
  • Barrel nut wrench
  • Installation instructions

Frequently Asked Questions

Will this Combat Rail fit my DPMS low-profile .308 upper?

No, this is the DPMS High version, cut for receivers with a .210-inch tang height. If your upper is a DPMS low pattern, you'll want the matching low-profile version instead, which is built for a .150-inch tang. It's worth confirming which pattern your receiver is before ordering, since high and low aren't interchangeable. Note it also does not work with the DPMS G2.

Do I have to remove my gas block to install the 308 Combat Rail handguard?

In most cases, yes. The supplied barrel nut won't slide over a pinned or standard gas block, so you'll need it off the barrel during install. Once the barrel nut is torqued and the handguard is clamped on, you can reinstall the gas block. The internal diameter of 1.5 inches clears most low-profile gas blocks fine.

Does the handguard stay put and hold zero once it's installed?

It's built to. The 4140 torque plate and aluminum anti-rotation block clamp the rail against the barrel nut to prevent forward creep and rotation. Builders regularly report it locks in tight with no wobble, which keeps front-mounted lights, lasers, and bipods holding their point of aim through recoil.

What optic mount should I use with a high-profile handguard like this?

Because this is a high-profile rail, standard-height scope rings can put your objective too low and cause the scope to contact the handguard. Plan on taller rings or a cantilever mount to get proper clearance. It's a common setup on large-frame .308 builds, so most quality AR-10 mounts will get you there.

Additional information

UPC

812102033196

Manufacturer

Manufacturer Part Number

MICR30815

Color

Black

Length

15

Product Type

Free Float

Shipping Weight

1.655

Style

M-LOK

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries 15″ AR 308 Combat Rail M-LOK Handguard DPMS High Black”