Description
TriggerTech built this AR safety selector to pair with their high-performance triggers, and it shows the second you flip it. The detent rides on a silicon nitride ball tip, the same slick, wear-resistant material used on the bottom of the space shuttle, which gives every throw a smooth glide and a crisp, positive click you can feel through gloves. The center core is 440C stainless with a diamond-like carbon (DLC) coating for low friction and corrosion resistance, while the levers are cut from 17-4 stainless steel. It's a serious piece of hardware for anyone dialing in a competition or duty build.
What Sets This TriggerTech AR-15 Safety Apart
Most safety selectors force you to yank the pistol grip to get them in or out. TriggerTech patented this one to install and remove without touching the grip after the first setup, which is a genuine time-saver when you're swapping triggers, running maintenance, or just cleaning the rifle. It also ships ambidextrous, so you get controls on both sides right out of the gate.
Configuring the Short Throw Safety Selector
This selector can be set up as a 45 or 90 degree throw, so you can tune the rotation to how fast you want your thumb on and off safe. It comes with both a long lever and a short lever, and they're interchangeable side to side, letting you put the bigger paddle on your dominant hand. Prefer a clean single-sided setup? Swap one lever for the included end cap and you're done.
Fit and Build Notes
The unit fits AR-15 and AR-10 / LR-308 pattern lowers, so it works across most standard builds. At roughly two-thirds of an ounce, it won't add noticeable weight, and the all-stainless construction holds up in rough conditions. Real-world feedback is consistent on two points: it goes in easy and it runs silky smooth with a nice audible click. If you've upgraded your trigger, matching it with this safety rounds out the fire control group nicely.
Key Specifications
- Manufacturer: TriggerTech
- Manufacturer Part Number (MPN): ARS-SNS-49-YCM
- UPC: 885768001243
- Type: Ambidextrous Safety Selector
- Throw Configuration: 45 or 90 degree, interchangeable
- Compatibility: AR-15, AR-10 / LR-308
- Lever Material: 17-4 Stainless Steel
- Center Core / Tumbler: 440C Stainless Steel, DLC coated
- Detent Material: 440C Stainless Steel
- Detent Ball Tip: Silicon Nitride
- Finish: Stainless / Diamond-Like Carbon (DLC)
- Weight: 0.67 oz
What’s Included
- 1x 45/90-degree throw center core
- 1x Long safety lever
- 1x Short safety lever
- 1x End cap
- 1x Safety selector detent
- 1x Safety selector spring
Frequently Asked Questions
Does the TriggerTech AR-15 safety selector require removing the pistol grip to install?
Only for the very first installation. After that initial setup, TriggerTech's patented design lets you install and remove the safety without pulling the grip. That's a big convenience when you're changing triggers or doing routine cleaning and maintenance.
Can I run this safety selector on just one side?
Yes. It ships ambidextrous with levers for both sides, but an end cap is included so you can convert it to a single-sided setup. The long and short levers are also interchangeable, so you can put the larger paddle on your dominant hand.
Will this fit an AR-10 or is it AR-15 only?
It fits both. The selector works with standard AR-15 and AR-10 / LR-308 pattern lowers, so it's a safe pick across most common builds.
What makes the throw adjustable between 45 and 90 degrees?
The center core is designed with interchangeable throw settings, letting you configure it for either a 45 or 90 degree rotation. A shorter 45 degree throw gets your thumb on and off safe faster, which competition shooters tend to favor, while 90 degrees keeps the more traditional feel.




Reviews
There are no reviews yet.