$155.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Ballistic Advantage 6" .300 Blackout barrel is about as short as it gets for a shootable AR pistol build, and it's built to hold up. It's machined from 4150 Chrome Moly Vanadium steel, treated with a QPQ corrosion-resistant finish inside and out, and finished off with a QPQ-coated M4 feed ramp extension for smooth feeding. This is Ballistic Advantage's Modern Series line, so you're getting the features that matter without paying for frills you won't use.
The standout here is the DRP contour, short for Distinct Rigid Pattern. Instead of shaving a short barrel down to the bone, Ballistic Advantage adds a bit more wall thickness so the barrel stays stiff and sheds heat better. That extra rigidity matters a lot when you're firing a high-pressure round out of a stubby 6" tube, and it helps keep barrel whip to a minimum. The 1:7 twist rate is dialed in for .300 Blackout, stabilizing everything from lighter supersonic loads to heavy 220-grain subsonic rounds.
The .300 Blackout cartridge was designed from the ground up to run in short barrels and go quiet with a can, and this 6" barrel leans right into that. It uses a pistol-length gas system to keep cycling reliable in a compact configuration, which really pays off when you're running suppressed. The muzzle wears 5/8-24 threads, the standard for .30-caliber cans and muzzle devices, and the gas block journal is a common .750" so most of your existing hardware drops right on.
One of the nicer things about .300 Blackout is that it runs standard 5.56 bolts and magazines, so the barrel is really the only caliber-specific part you need to swap. Pair it with a .750" gas block, a pistol-length gas tube, and the buffer setup that matches your ammo plan, and you've got a compact, hard-hitting upper ready to go. It's a solid foundation for a PDW-style pistol, a suppressed host, or a truck gun that doesn't take up much room.
Yes, that's really what it's built for. The 1:7 twist stabilizes heavy subsonic loads up through 220-grain, and the pistol-length gas system helps the action cycle cleanly when you add a can. Keep in mind that dedicated subsonic setups often run best with the right buffer and spring combination to tune cycling.
The muzzle is threaded 5/8-24, which is the standard for .30-caliber muzzle devices and suppressors. The gas block journal measures .750", so most common clamp-on or set-screw gas blocks will fit right on. You'll want a pistol-length gas tube to match the gas port location.
No, and that's one of the best parts of the cartridge. .300 Blackout runs on standard 5.56 NATO magazines and a standard 5.56 bolt, so the barrel is the only caliber-specific piece you need to change. That makes building or converting an upper about as simple as it gets.
The DRP, or Distinct Rigid Pattern, has a bit more wall thickness than a lightweight profile. That extra material keeps the short barrel stiff and helps dissipate heat, which reduces barrel whip when you're running a high-pressure round out of a 6" tube. It's a good trade when accuracy and durability matter more than shaving every last ounce.
| UPC | 819747022066 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BABL300013M |
| Barrel Length | 6'' |
| Length | 6'' |
You must be logged in to post a review.
Reviews
There are no reviews yet.