$16.95
31 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Strike Industries took a part most folks never think twice about and gave it a real upgrade. The Enhanced Ultimate Dust Cover ditches the thin factory metal in favor of high-density polymer that won't rust, corrode, fade, or warp on you. It tips the scale at a barely-there 0.3 ounces and measures 3.46 inches, so it does its job without adding any noticeable weight to your build. The FDE finish is a nice touch if you're trying to match a coyote or earth-tone setup.
The headline feature here is the spring-loaded internal detent rod, which lets you attach or remove the cover in about 5 to 10 seconds without wrestling with the standard C-clip and pin that make stock covers such a pain. A cut-out window gives you access to depress the rod, so swaps and takedown stay quick even out in the field. There's also a built-in adjustable detent set screw that lets you compensate for a worn receiver or simply tune how much effort it takes to pop the cover open. A small flathead is all you need to make the adjustment.
The patent-pending True Seal internal lip seals the ejection port tighter than a traditional cover, which means less dust, moisture, and debris finding its way into your action. This enhanced version was also made slimmer than the original, giving it better compatibility across just about any standard-pattern AR-15 upper, including billet receivers.
Installation is straightforward and takes just a few minutes, though it's worth following the instructions closely to make sure everything seats correctly. A dab of blue Loctite on the detent screw threads after you've dialed in your tension is a smart move to keep your setting locked. It's a simple, well-thought-out part that punches above its weight for anyone building or refreshing an AR-15.
It's designed to fit standard-pattern .223/5.56 AR-15 upper receivers. The enhanced version was made slimmer than the original specifically to improve compatibility across most uppers on the market, including billet receivers. As with any dust cover, seating it correctly during install matters, so double-check the fit if you're running a less common upper.
Most folks have it on in just a few minutes. The spring-loaded internal detent rod and cut-out window let you attach or remove the cover in roughly 5 to 10 seconds once you're familiar with it, which is a big step up from wrestling with the standard C-clip setup. No specialty tools are required beyond a small flathead for the detent adjustment.
It lets you fine-tune how much force it takes for the cover to pop open. That's handy for compensating on a worn receiver or just setting the tension to your personal preference. Use a small flathead to depress the ball detent and adjust as needed, then a dab of blue Loctite helps keep your setting in place.
Strike built this from high-density polymer that won't rust, corrode, fade, or warp, and many builders and competition users trust it round after round. Because it's polymer, it stays put through the heat of rapid fire without the True Seal lip losing its shape. At 0.3 ounces it's also lighter than the stock metal version.
| UPC | 700598350555 |
|---|---|
| Manufacturer |
You must be logged in to post a review.
Reviews
There are no reviews yet.