$188.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most adjustable gas blocks work by restricting flow, which traps carbon and can seize up the adjustment screw over time. Superlative Arms took a different route with the patented Bleed Off design. Instead of choking the gas down, it vents the excess pressure out the front of the block, leaving only what's needed to drive the bolt carrier. The payoff is a system that runs cleaner and cooler, with less wear on the bolt carrier group and a real drop in felt recoil for quicker follow-up shots.
Because the adjustment detent lives outside the block, it stays out of the gas path entirely. That means no carbon fouling on the screw and no lost detent settings once you've dialed it in. There's also a built-in safety stop so you won't accidentally back the screw all the way out during adjustment. You can run it in traditional restriction mode or the bleed off mode, though the folks at Superlative and plenty of owners lean toward bleed off since it keeps the screw from gumming up.
This version is machined from ultra-tough titanium and wears a gray DLC finish, so you're getting serious durability without piling on weight. The .936" journal size is sized for AR-15 and AR-10 barrels with that larger diameter, and the clamp-on mount is a favorite for good reason. It's easier to install and remove than set-screw or pinned blocks, and the low profile tucks under most standard and free-float handguards without drama.
If you shoot suppressed or run a short-barreled setup, this is where the Bleed Off shines. Over-gassed guns dump pressure and carbon back in your face, and this block cuts that blowback down considerably. Keep in mind that proper tuning is a team effort between the gas block, buffer weight, and spring, so give yourself a little range time to get everything singing together. A torque wrench for the clamp screws is a smart move during install.
Conventional adjustable blocks restrict gas flow, which can trap carbon and seize the adjustment screw. The Superlative Arms Bleed Off design vents the excess gas out the front of the block instead, sending only what's needed to cycle the bolt. That keeps the action cleaner and cooler and the adjustment screw fouling-free since the detent sits outside the gas path.
It's a low-profile block that fits under most standard and free-float handguards without adding much dimension beyond a typical low-pro block. Just confirm your barrel has a .936" gas block journal, since that's the diameter this model is machined for. If your barrel uses a .750" or .875" journal, you'll want the matching size instead.
Yes, this is one of the situations where the Bleed Off really earns its keep. Suppressed and SBR builds tend to be over-gassed, which dumps blowback and carbon back toward the shooter, and venting the excess gas forward cuts that down noticeably. It also reduces felt recoil for faster follow-up shots.
A torque wrench is recommended for the clamp screws so everything seats properly, and you'll adjust the gas with a hex key. Tuning is a bit of give-and-take between the gas block, buffer weight, and spring, so plan on some range time to dial it in. Once set, the external detent holds its position without carbon knocking it loose.
| UPC | 850011846506 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-936CGT |
| Style | Clamp-On |
You must be logged in to post a review.
Reviews
There are no reviews yet.