$92.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most adjustable gas blocks tune your rifle by squeezing the gas flow down until only enough pressure gets back to cycle the bolt. Superlative Arms took a different road. Their patented Bleed Off system lets full gas travel to the port, then vents the excess out the front of the block instead of restricting it. The result is a system that runs cleaner and cooler, with noticeably less felt recoil and less junk getting driven back into your action.
This version is built for a .936" gas block journal, so it fits both AR-15 and AR-10/LR-308 barrels running that larger diameter. The body is machined from 416 stainless steel with a matte finish, and it tips the scales right around 1.8 ounces, so you're not adding meaningful weight under the handguard. It plays nice with pistol, carbine, mid-length, and rifle-length gas systems using standard gas tubes.
The clamp-on design is a big deal if your barrel doesn't already have set-screw dimples. Instead of biting into the barrel with screws, the two-piece clamp wraps around and distributes clamping force evenly, which is easier on the barrel and helps keep everything centered. Snug it down with a torque wrench to the recommended spec, drop your handguard back on to confirm it's centered, and you're set. No drilling, no pinning, no gunsmith required.
One of the smartest touches here is that the adjustment detent sits outside the block, away from all the carbon and heat. That means the screw won't erode, seize, or lose its clicks to fouling over time. There's also a built-in stop so you can't accidentally back the screw all the way out. Whether you're taming blowback on a suppressed setup, softening a snappy SBR, or fine-tuning a pencil-barrel build for tighter groups, this block gives you the range to get it right for your specific ammo and configuration.
Conventional adjustable gas blocks work by restricting the gas port to limit how much gas reaches the bolt carrier. Superlative Arms flips that idea by letting full gas into the block and venting the excess forward out of the block instead. This keeps the system running cooler and cleaner, cuts felt recoil, and reduces the blowback that gets driven back into your action.
This model is sized for barrels with a .936" gas block journal, which is common on heavier AR-15 profiles as well as AR-10 and LR-308 builds. Measure your barrel's journal diameter under where the gas block sits before ordering. It works with standard gas tubes across pistol, carbine, mid-length, and rifle-length systems.
Not at all, and it's a great choice if your barrel doesn't have set-screw dimples. You slide it into place, tighten the clamp screws evenly with a Torx T-15, and torque to the recommended spec, typically not exceeding 30 inch-pounds. Reinstall your handguard to confirm the block is centered and you're good to go, no drilling or pinning needed.
It's one of the top reasons folks buy this block. When you run a suppressor, back pressure spikes and dumps extra gas and fouling into your face and action. The Bleed Off port vents that excess pressure out the front, which noticeably reduces blowback and keeps a suppressed setup running smoother.
| UPC | 850011846131 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-936CS |
| Style | Adjustable |
You must be logged in to post a review.
Reviews
There are no reviews yet.