$89.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most adjustable gas blocks work by restricting flow, which traps carbon and heat right where you don't want it. Superlative Arms took a different route. Their patented Bleed Off design vents the extra gas forward and out the front of the block, keeping only the pressure your bolt actually needs to cycle. The payoff is a rifle that runs cleaner, cooler, and with noticeably less felt recoil, plus a bolt carrier group that isn't taking a beating on every shot.
This is the .750" clamp-on version in a black Melonite finish, machined from 416 stainless steel. The clamp-on mount grips the barrel evenly without any drilling or dimpling required, which makes it a solid pick if your barrel journal isn't already set up for a set screw. Builders also tend to like the clamp-on style for the more even, consistent hold it puts around the barrel.
If you shoot suppressed or run a short barrel, over-gassing and gas to the face are the usual complaints. Because this block dumps the excess pressure out the front, folks running cans and SBRs consistently report cleaner, smoother cycling with less blowback. Dialing an over-gassed rifle down until the brass lands right around 3 or 4 o'clock is exactly what this block was built for.
The adjustment screw offers 30 locked positions with a detent that sits outside the block, so carbon buildup never fouls your settings or seizes the screw. Superlative Arms also built in a safety stop so you can't accidentally back the screw all the way out during a tuning session. Once you find your setting, it stays put. It's a genuine set-it-and-forget-it upgrade for AR-15, AR-10, and LR-308 platforms chambered in .223, 5.56, .308, 7.62×51, 6mm ARC, .300 Blackout, and more.
No. The clamp-on design grips the barrel evenly and holds itself in place without drilling, pinning, or dimpling. That makes it a good option for barrels that aren't already set up for a set screw. You'll still need to properly align it at 12 o'clock and pin your gas tube during install.
It fits most standard free-float handguards, but because it's a clamp-on block the clamp screws sit a touch wider than a set-screw block. Some very slim or tight-fitting rails can contact the screws, so it's worth checking your handguard's inner diameter before ordering. If you're running a heavy or precision profile setup, clearance is usually not an issue.
Suppressors and short barrels create extra back pressure, which usually means more gas blowback and a dirtier action. This block vents that excess pressure out the front instead of holding it in the system, so you get less gas to the face and cleaner, cooler cycling. Suppressed and SBR builds are exactly where this design shines.
It offers 30 locked positions, and the adjustment detent sits outside the block where carbon can't foul it. That means no screw erosion or lost settings from buildup over time. There's also a built-in safety stop so you can't accidentally back the screw all the way out while tuning.
| UPC | 850011846049 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-750CM |
| Style | Clamp-On |
You must be logged in to post a review.
Reviews
There are no reviews yet.