$260.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Superlative Arms built this piston system to take the guesswork out of running a gas piston AR-15. Instead of choking down the gas flow like a conventional adjustable block, their patented Bleed Off design vents the excess pressure out the front of the block and only sends what's needed to drive the carrier. The result is a rifle that runs noticeably cleaner and cooler, with less wear on the bolt carrier group and upper receiver over the long haul. This particular kit is the rifle-length, left-hand configuration built around a solid .750" gas block with set-screw attachment.
The tuning is where this setup earns its keep. You get 30 locked positions, and the adjustment detent sits on the outside of the block rather than buried inside it. That means no carbon contamination fouling your settings and no erosion or seizing of the adjustment screw. Dial it in for a soft, flat-shooting recoil impulse or crank it up for heavier loads and dirtier ammo. There's even a built-in safety feature that keeps you from accidentally backing the adjustment screw all the way out.
If you shoot suppressed or run an SBR, the bleed off port does real work here by venting excess back pressure forward instead of blowing it back into your face. The one-piece carrier is ion-bonded with a dark DLC coating that wipes clean easily and needs less lubrication, and it rides on anti-tilt skids with a dimpled key that centers the op rod on every stroke. It's also full-auto rated, so durability isn't a question.
The gas block is made from 416 stainless steel with a Melonite QPQ finish for solid corrosion and wear resistance. Keep in mind this is a kit meant to pair with your existing bolt, since the carrier ships without a bolt assembly and gas rings aren't needed on a piston carrier. Superlative Arms backs their products with 30-plus years of aerospace manufacturing experience and a lifetime warranty.
No, this kit ships with the one-piece piston carrier but does not include a bolt assembly, meaning the bolt, cam pin, firing pin, and firing pin retainer. You'll reuse your existing bolt with the piston carrier. Gas rings aren't required with the piston carrier and can be removed.
Rather than restricting gas flow like a conventional adjustable block, the Bleed Off design vents excess gas and pressure out the front of the block and only uses what's needed to cycle the action. This keeps the rifle running cleaner and cooler while reducing wear on the bolt carrier group and upper receiver. It also helps cut down felt recoil for faster follow-up shots.
Yes, it's well suited for suppressors and SBRs. When you add a can, back pressure climbs, and the bleed off port lets that excess pressure exhaust forward out of the block instead of blowing back toward you. With 30 locked positions, you can fine-tune the gas for both suppressed and unsuppressed shooting.
Superlative Arms places the patented locking detent on the exterior of the block so it stays free of carbon contamination. Since the adjustment screw doesn't sit in the gas path, there's no erosion, seizing, or loss of detent from carbon buildup. A built-in safety feature also keeps you from unintentionally backing the screw all the way out.
| UPC | 850051342662 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-PS-LFD-R750SM |
You must be logged in to post a review.
Reviews
There are no reviews yet.