$90.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The stock Glock trigger gets the job done, but nobody's ever confused that mushy take-up and vague break with a tuned 1911. That's exactly the gap this Apex Polymer Action Enhancement Trigger Kit is built to close. It's a complete drop-in package that pulls out your factory trigger, connector, and striker plunger and replaces them with matched Apex parts designed to work together as a system. You get a flat-faced polymer Action Enhancement trigger, a Gen 3 trigger bar, an Apex Performance Connector, and the Apex Ultimate Safety Plunger, all in a purple finish that stands out through a clear or aftermarket frame.
The numbers are modest on paper but noticeable in the hand. Expect roughly a one-pound drop in pull weight along with shorter pre-travel, less overall travel, and a tighter reset. The bigger story is smoothness. Where the factory setup feels gritty and long, the Apex parts give you a cleaner uptake and a crisper break, which makes fast follow-up shots and precise slow-fire both easier to manage. The center-mounted pivoting safety keeps the same factory safety values, so you're refining the trigger feel without changing how the gun's safeties operate. It's one of the most popular first upgrades Glock owners make, and for good reason.
This kit is a direct drop-in for standard-frame Gen 3 and Gen 4 pistols: the G17, 17L, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, and 35. No fitting or filing on compatible models. Most folks handle the swap at the bench in well under half an hour with a single punch and Apex's install video, though if pins and springs aren't your thing, any gunsmith can knock it out quickly. Worth noting up front: it does not fit the 10mm, .45 ACP, or .45 GAP Glock models, and it's not made for Gen 5 pistols. The visible trigger bar may come in matte nickel or bright nickel depending on the run.
Yes, it's designed as a direct drop-in for both Gen 3 and Gen 4 standard-frame Glocks, including the G17, 19, 22, 23, 26, 27, 34, 35, and the rest of that lineup. It does not fit the 10mm, .45 ACP, or .45 GAP models, and it is not made for Gen 5 pistols. If you're running an aftermarket frame, check compatibility before ordering since fitment can vary on those.
Apex rates it at roughly a one-pound reduction in pull weight over the factory setup. More than the weight change, most people notice the smoother uptake, cleaner break, and shorter reset. Like a lot of triggers, it tends to smooth out even more after a short break-in period at the range.
Not necessarily. Since it's a complete drop-in kit with the trigger bar, connector, and plunger all included, the swap usually takes under 30 minutes with a single punch and Apex's install video. That said, if you aren't comfortable working inside your slide and frame, any gunsmith can handle the install quickly.
This is the complete kit, so it includes its own Gen 3 trigger bar along with the polymer trigger, Performance Connector, and Ultimate Safety Plunger. You don't have to reuse any factory trigger components. That's the main difference between this kit and the trigger-only versions Apex sells, which require mounting the shoe on your existing bar.
| UPC | 854751007500 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 102P165 |
| Model | |
| Style | Kit |
You must be logged in to post a review.
Reviews
There are no reviews yet.