Description
This is the kit action-pistol shooters reach for when their M&P trigger feels heavy and vague right out of the box. The Apex Competition Action Enhancement Kit turns a gritty factory pull into something crisp and predictable, which is exactly what you want when you are running a stage against the clock. Designed for the S&W M&P in .40 S&W, it drops the trigger weight by roughly 4 pounds off a typical 7 to 8 pound starting point, landing most guns right in that sweet 4 pound range where the break is clean and the reset is short.
What the Competition Action Enhancement Kit Brings to the M&P
The heart of the kit is a fully machined sear that reshapes the trigger geometry to cut over-travel and tighten up the reset. Pair that with the shot-peened competition striker spring and trigger return spring and you get a trigger that feels lighter, moves less, and shrugs off the round counts that matches like IDPA, USPSA, and Steel Challenge throw at it. The shot-peening is not marketing filler either, it is there to help the springs go the distance so your trigger feel stays consistent deep into a season of practice and competition.
Installing the Apex Comp Kit and What Fits
Everything here is engineered to drop in without cutting or fitting, and Apex includes a slave pin plus their Ultimate Striker Block Kit with the Talon tool to make the job smoother. Plenty of folks handle it at the bench in a few minutes once the trigger group is out, though if you are not comfortable field-stripping the fire control group, having an armorer or gunsmith set it up is the way to go. This kit pairs especially well with M&P pistols already running an Apex polymer or aluminum Action Enhancement Trigger, so if you have been building your gun piece by piece, it slots right into that setup.
Bottom line, if you shoot an M&P .40 and the trigger has been holding you back, this is one of the most cost-effective upgrades you can make to your gun.
Key Specifications
- Manufacturer: Apex Tactical Specialties Inc.
- Manufacturer Part Number: 100072
- Model: Competition Action Enhancement Kit
- UPC: 856008005192
- Caliber Fit: .40 S&W (also fits 9mm and .357 SIG M&P)
- Fits: Smith & Wesson M&P Pistols
- Material: Metal
- Application: Action Shooting Competition
- Trigger Weight Reduction: Approx. 4.0 lbs (from a 7.0 to 8.0 lb start)
- Installation: Drop-in, no gunsmithing required
- Spring Treatment: Shot-peened for extended service life
What’s Included
- (1) Fully Machined Sear
- (1) Competition Striker Spring
- (1) Competition Spring Set (Trigger Return Spring and 1/8" Sear Spring)
- (1) Ultimate Striker Block Kit (Striker Block, Spring, and Talon Tactical Tool)
- (1) Slave Pin (assists with trigger return spring installation)
Frequently Asked Questions
How much lighter will this Competition Action Enhancement Kit make my M&P trigger?
The kit reduces trigger pull weight by roughly 4 pounds based on a typical factory starting point of 7 to 8 pounds, which usually puts guns right around the 4 pound mark. The exact result varies a little from pistol to pistol, but the trigger comes out noticeably lighter with a cleaner break and shorter reset. It is a real, feelable change, not a subtle one.
Does the Apex Comp kit fit my .40 S&W M&P?
Yes, this kit is made for the S&W M&P platform and covers the .40 S&W, along with 9mm and .357 SIG variants. It is intended for the M&P pistol line and pairs especially well with guns already running an Apex polymer or aluminum Action Enhancement Trigger. If you are unsure about your specific model or generation, confirm your trigger group before ordering.
Can I install this myself or do I need a gunsmith?
The kit is engineered to drop in without cutting or fitting, and it includes a slave pin and the Talon tool to make the process easier. Many owners handle it at home in a matter of minutes once the fire control group is out, and Apex offers install videos to walk you through it. That said, if you are not confident breaking down the trigger assembly, having an armorer or gunsmith do the install is a smart move.
Is this kit good for carry or is it strictly for competition?
This is the Competition kit, tuned for the lighter, crisper feel that action-pistol shooters want for IDPA, USPSA, and Steel Challenge. If your priority is a defensive or duty setup, Apex makes duty-carry oriented kits that keep a slightly heavier pull weight for that purpose. Match the kit to how you actually use the pistol.





Reviews
There are no reviews yet.