$100.30
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Direct thread mounting keeps things simple, and the Anechoic DTA3420 keeps it light too. This adapter converts any suppressor with the industry standard 1.375×24 HUB body thread over to a 3/4×20 direct thread mount, so your can screws right onto the muzzle with no extra hardware hanging off the end of your barrel. It was built for the AnechoX line, but since it uses the same HUB thread found across so many modern suppressors, it plays well with plenty of other brands too.
Anechoic machined this adapter from solid titanium, and the payoff is real. It weighs a scant 0.8 ounces, which comes out to roughly a third of what comparable steel adapters put on your muzzle. That matters more than you might think, since every ounce at the end of the barrel changes how a rifle balances and swings. Titanium also shrugs off corrosion, so sweaty range days and wet hunts are not going to leave it looking rough. The matte black finish blends in cleanly with most suppressor bodies.
The 3/4×20 thread pitch covers big bore hosts and other barrels cut to that spec, and installation is straightforward. The adapter threads into the suppressor body first, then the whole assembly spins onto the muzzle for a secure, repeatable connection you can service whenever needed. You will want the AnechoX DTA wrench to install and torque it properly, which is sold separately. It works with the AnechoX 30, 223, 35, and 45 families, though not the AnechoX 22, and as always, give the bore a quick visual alignment check before sending the first round.
If you have been running a heavier steel mount or juggling multiple hosts with different thread pitches, picking up a DTA in each pitch you need is an easy way to move one suppressor across your whole safe.
Yes, as long as the suppressor uses the industry standard 1.375×24 HUB body thread. That is the same pattern used by Bravo-style and HUB-compatible cans from a wide range of manufacturers, so this adapter is not limited to AnechoX suppressors.
You will need the AnechoX DTA wrench to properly install, torque, and remove the adapter, and it is sold separately. It is an adjustable pin-style spanner that grips the adapter securely without chewing up the finish the way hook spanners tend to.
It fits the AnechoX 30, 223, 35, and 45 models, including the L versions. The one exception is the AnechoX 22, which uses a different mounting system and will not accept this adapter.
This adapter weighs just 0.8 ounces thanks to its solid titanium construction. Comparable steel direct thread adapters run around 2.3 ounces, so you are cutting roughly two thirds of the weight right at the muzzle where it matters most for balance and handling.
| UPC | 850059666234 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DTA3420 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.