$83.30
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Sometimes you just want to spin your can on and go shoot. That is exactly what the ANECHOIC DTA 5/8×24 is for. It threads into the 1.375×24 body of your AnechoX suppressor and gives you a clean, low-profile direct thread mount for 5/8×24 barrels, which covers most .30 caliber bolt guns and ARs chambered in cartridges like 308, 6.5 Creedmoor, and 300 Blackout. No muzzle device to time, no locking collar, just solid thread engagement and a repeatable mating surface.
ANECHOIC machines this adapter from solid titanium, and the payoff is real. It weighs a mere 0.8 ounces, which is roughly a third the weight of comparable steel direct thread adapters on the market. When you are already hanging a suppressor off the end of your barrel, every ounce you save up front helps keep the rifle balanced and your muzzle from feeling like a boat anchor. Titanium also shrugs off corrosion, so a wet hunt or a sweaty range day is not going to leave it looking rough. The matte black finish keeps it subtle and matches most cans nicely.
While this DTA was designed for the AnechoX line (every model except the AnechoX 22), it uses the same 1.375×24 body thread found on Bravo, HUB, and other industry standard suppressors. That means if you run multiple cans from different makers, one adapter can pull duty across your whole safe. It is a smart way to standardize your mounts without buying proprietary hardware for every rifle.
Installation is straightforward: thread the adapter into the suppressor body, torque it down, then spin the whole assembly onto your muzzle. You will want the AnechoX DTA wrench for proper install and removal, which is sold separately. As with any suppressor mount, double check your barrel's thread pitch and confirm alignment before you send the first round. Do that, and this little piece of titanium will quietly do its job for years.
Yes. The adapter uses the industry standard 1.375×24 body thread, the same pattern found on HUB and Bravo style mounts. That means it fits most modern suppressors built around that thread, not just the AnechoX line. The one exception on the ANECHOIC side is the AnechoX 22, which uses a different mounting setup.
You will want the AnechoX DTA wrench, which is sold separately. It is an adjustable pin wrench that lets you torque the adapter properly without chewing up the finish the way a hook spanner can. Once the adapter is seated in the suppressor body, the whole assembly threads onto your barrel by hand.
5/8×24 is the most common thread pitch for .30 caliber barrels. You will find it on most rifles chambered in 308 Win, 6.5 Creedmoor, 300 Blackout, 300 Win Mag, and similar cartridges. Always verify your barrel's actual thread pitch before mounting, since a few manufacturers use less common pitches on certain models.
This adapter weighs just 0.8 ounces thanks to its solid titanium construction. Comparable steel direct thread adapters run around 2.3 ounces, so you are looking at roughly a third of the weight. Titanium also resists corrosion better than steel, which matters if your rifle sees weather.
| UPC | 850059666210 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DTA5824 |
| Model | |
| Product Type | Mount |
You must be logged in to post a review.
Reviews
There are no reviews yet.