$79.99
35 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The AmeriGlo GL241 Pro-Glo set takes the front sight your eye already wants to find and makes it impossible to miss. A green tritium lamp sits inside a bright orange outline up front, so in daylight your eye snaps right to it and in the dark the tritium keeps glowing on its own. The rear is a clean two-dot green tritium setup wrapped in white outlines, which keeps your focus where it belongs without cluttering the picture. That orange-front, white-rear combo is a big reason folks reach for this set over a plain three-white-dot arrangement.
These are built from steel, not the polymer that ships on a lot of factory Glocks, so they hold up to holster wear and slide manipulation. The Pro-style rear has a squared 90-degree front face, which gives you an edge to hook on a belt or boot heel if you ever need to rack the slide one-handed. The rear also sits a touch further back for a slightly longer sight radius, and that extra distance between front and rear helps when you're trying to stretch out your accuracy. Front sight width runs .140 inch with a .180 inch rear notch, a proven ratio that leaves enough light on either side of the front post for quick alignment.
The GL241 covers a wide swath of the Glock lineup, fitting Gen 1-4 models in 9mm, .40, and .380 along with Gen 5 10mm and .45 pistols. That includes popular numbers like the 17, 19, 22, 23, 26, 27, 34, and 35. It does not fit MOS-cut slides, so keep that in mind if your pistol is optics-ready.
The front sight uses a 3/16 inch nut driver and goes on quickly. The rear is a dovetail fit and seats tight, which is exactly what you want since it won't drift under recoil, though it does mean a proper sight pusher makes the job far easier than trying to drift it with a punch. AmeriGlo backs the tritium lamps with a 12-year warranty, so you get a long service life out of the glow before it ever fades.
It fits most Gen 1-4 Glocks in 9mm, .40, and .380, plus Gen 5 models in 10mm and .45. That covers common models like the 17, 19, 22, 23, 26, 27, 34, and 35. It will not fit MOS-cut slides, so double-check if your pistol is optics-ready before ordering.
The front sight installs with a 3/16 inch nut driver and goes on fast. The rear is a snug dovetail fit, so a sight pusher makes the job much easier and cleaner than trying to drift it with a punch. That tight fit is a good thing, since it means the rear won't shift on you under recoil.
The Pro-Glo front swaps the plain white ring for a bright orange outline, which pulls your eye to the front sight faster in daylight. The rear stays a clean two-dot white outline so it doesn't compete for your focus. All three dots are tritium, so the whole picture stays visible in the dark.
AmeriGlo warrants the green tritium lamps for 12 years from the date of manufacture. Green is the brightest and longest-lasting tritium color, so you get a long, dependable service life out of the glow. The LumiGreen paint also charges under light and glows briefly after exposure for an extra visibility boost.
| UPC | 644406905844 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GL241 |
| Color | Green, Orange |
| Model | |
| Product Type | Sight |
| Style | Custom 3-Dot |
You must be logged in to post a review.
Reviews
There are no reviews yet.