$10.99
45 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Every AK owner eventually runs into the same truth: the platform is tough, but the little internal parts make a big difference in how it runs. The ALG Defense AK-47/74 High Energy Main Spring is one of those small upgrades that punches way above its size. It's a direct replacement hammer spring built to hit harder and more consistently than the mil-spec spring most rifles ship with, and it drops into AK-47 and AK-74 pattern rifles chambered in 7.62x39mm and 5.45x39mm.
The spring is a single-wire chrome silicon design fabricated to ASTM A401 specifications, which is the same standard you'd expect from high-quality valve and clutch springs. That construction gives it corrosion resistance and the ability to hold its performance through temperature swings and hard use. ALG rates it at about 25% more torque than a standard factory main spring, and that extra energy is where the real benefit lives.
More hammer torque means lower lock time and a harder, more consistent hit on the primer. If you've dealt with light primer strikes, hang-fires, or a spring-loaded firing pin robbing you of ignition energy, this spring is a common fix. Folks running harder military-surplus primers or shooting a mixed bag of ammo tend to notice the improvement first. It also pairs naturally with an ALG AK trigger, adding a firmer, crisper reset and cleaner take-up compared to a worn or braided factory spring.
Swapping it in is a straightforward job for anyone comfortable working inside an AK fire control group. It's easy enough to tackle at the bench with a little patience, and there's plenty of guidance out there if it's your first time. One tip worth noting: depending on your build, you may need to tweak the leg position slightly so the spring sits properly and doesn't ride on the trigger pin. ALG recommends having their parts installed by a qualified gunsmith if you'd rather leave it to a pro.
It's designed as a direct replacement for AK-47 and AK-74 pattern rifles, including builds chambered in 7.62x39mm and 5.45x39mm. It works with most standard AK fire control groups. Depending on your specific build, you may need to adjust the spring legs slightly so they seat correctly and don't rest on the trigger pin.
The added torque, roughly 25% over a factory spring, gives the hammer a harder and faster strike on the primer. That lowers lock time and improves ignition consistency, which helps knock out light primer strikes and hang-fires. It's especially handy if you shoot harder surplus primers or a variety of ammo.
Yes, it's a natural companion to ALG's AK triggers. Owners often report a firmer, more positive take-up and a noticeably crisper reset compared to a worn or braided factory spring. If your trigger pull felt too light, this spring can bring it into a more usable range.
For anyone comfortable working in an AK fire control group, it's a quick job at the bench. There's plenty of instructional video out there if it's your first time doing it. ALG recommends having their parts installed by a qualified gunsmith if you'd prefer to leave it to a professional.
| UPC | 817953021903 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 04-233-F |
| Color | Silver |
| Product Type | Spring |
You must be logged in to post a review.
Reviews
There are no reviews yet.