0
0

AmeriGlo Agent 3-Dot Tritium Sight Set for Glock Gen 1-4 9mm/G5 10mm

UPC: 644406911906

$74.99

49 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The AmeriGlo Agent 3-Dot Tritium Sight Set takes what AmeriGlo learned building sights for a well-known Federal law enforcement contract and puts it on your Glock. You get a ProGlo front sight with a green tritium lamp wrapped in a bright orange outline, paired with a rear sight sporting a rounded U-notch and two subdued green tritium lamps. The result is a sight picture that snaps together fast in daylight and stays visible when the sun goes down.

What Sets the Agent Sight Set Apart

The front post is the star here. That orange ring around the green tritium dot draws your eye right where it needs to go, which matters a lot when you're moving quick or under stress. The rear U-notch is tapered from back to front, creating a funneling effect that channels your focus onto the front sight instead of fighting it. AmeriGlo also serrates the rear face to cut glare, so bright range lights or afternoon sun won't wash out your picture. The front blade runs .14 inches wide with the rear U-notch at .165 inches, a combo folks find gives a clean, uncluttered view downrange.

Fit and Tritium Details for the Agent Set

This particular set (part GL-852MOS) covers Glock Gen 1 through 4 in 9mm along with Gen 5 10mm models. The front sight comes in at .18 inches tall for the 9mm/.40/.357 platforms. These are steel, not polymer, so they hold up to real-world carry and holster wear far better than the factory plastic sights most Glocks ship with. The tritium lamps glow on their own with no charging or batteries, and AmeriGlo backs their tritium for years of dependable low-light performance.

Whether you carry every day, keep a Glock for home defense, or just want a serious upgrade over stock sights, the Agent set is a proven, no-nonsense choice that plenty of officers and instructors put their trust in. Installation is straightforward with a proper sight pusher or through a gunsmith if you'd rather leave it to a pro.

Key Specifications

  • Manufacturer: AmeriGlo
  • Manufacturer Part Number: GL-852MOS
  • UPC: 644406911906
  • Series: Agent
  • Configuration: 3-Dot Tritium Night Sight Set
  • Front Sight: ProGlo Green Tritium with Orange Outline
  • Rear Sight: U-Notch, Two Green Tritium Lamps with Black Outlines
  • Rear Notch Style: Rounded U-Notch
  • Front Sight Height: 0.18 in
  • Front Sight Width: 0.14 in
  • Rear Notch Width: 0.165 in
  • Material: Steel
  • Fitment: Glock Gen 1-4 9mm / Gen 5 10mm
  • Rear Face: Serrated (Anti-Glare)

What’s Included

  • AmeriGlo Agent ProGlo front sight (green tritium/orange outline)
  • AmeriGlo Agent U-notch rear sight (two green tritium lamps)

Frequently Asked Questions

What Glock models does the AmeriGlo Agent GL-852MOS set fit?

This set is made for Glock Gen 1 through 4 pistols chambered in 9mm, along with Gen 5 10mm models. That covers popular guns like the G17, G19, G22, G23, G26, and similar frames within those generations. Gen 5 9mm and .40 pistols use a different front sight height, so double-check your generation before ordering.

Do the tritium dots need batteries or charging?

No. Tritium glows on its own through a self-powered reaction, so there's nothing to charge or replace. The orange front outline is photoluminescent for daytime contrast, while the tritium handles the dark. AmeriGlo warranties their tritium lamps for years of reliable glow.

What's the difference between the U-notch and a square-notch rear?

The Agent set uses a rounded U-notch that's tapered from rear to front, which funnels your eye toward the front sight for quicker acquisition. Some shooters prefer this over a traditional square notch because it gives a cleaner, less cluttered sight picture. The rear face is also serrated to knock down glare.

Can I install these AmeriGlo Agent sights myself?

Yes, if you have the right tools. A proper sight pusher makes both the front and rear install straightforward, and the front sight uses the standard Glock hex screw. If you don't have a pusher, a local gunsmith can knock it out quickly so your zero stays true.

Additional information

UPC

644406911906

Manufacturer

Manufacturer Part Number

GL-852MOS

Model

Style

U Notch

Reviews

There are no reviews yet.

Be the first to review “AmeriGlo Agent 3-Dot Tritium Sight Set for Glock Gen 1-4 9mm/G5 10mm”